Aujourd'hui, c'est une société pleine de gens talentueux, la meilleure façon de suivre et assurer la place dans votre carrière est de s'améliorer sans arrêt. Si vous n'augmentez pas dans votre carrière, vous êtes juste sous-développé parce que les autres sont meilleurs que vous. Pour éviter ce cas, vous devez vous former successivement.
Les spécialiste profitant leurs expériences et connaissances font sortir les documentations particulière ciblées au test IBM C6040-753 pour répondre une grande demande des candidats. Maintenant, la Q&A plus nouvelle, la version plus proche de test IBM C6040-753 réel est lancée. C'est possible à réussir 100% avec le produit de IBM C6040-753. Si malheureusement, vous ne passez pas le test, votre argent sera tout rendu. Vous pouvez télécharger le démo gratuit en Internet pour examiner la qualité de Q&A. N'hésitez plus d'ajouter le produit au panier, Pass4Test peut vous aider à réussir le rêve.
Il y a beaucoup de gans ambitieux dansn l'Industrie IT. Pour monter à une autre hauteur dans la carrière, et être plus proche du pic de l'Industrie IT. On peut choisir le test IBM C6040-753 à se preuver. Mais le taux du succès et bien bas. Participer le test IBM C6040-753 est un choix intelligent. Dans l'Industrie IT de plus en plus intense, on doit trouver une façon à s'améliorer. Vous pouvez chercher plusieurs façons à vous aider pour réussir le test.
Code d'Examen: C2180-605
Nom d'Examen: IBM (IBM WebSphere Enterprise Service Bus V7.0,Integration Development)
Questions et réponses: 171 Q&As
Code d'Examen: C6040-753
Nom d'Examen: IBM (Retail Store Solutions - 4690 Technical Solutions)
Questions et réponses: 75 Q&As
Pass4Test est un site d'offrir l'outil de formation convenable pour les candidats de test Certification IT. Le produit de Pass4Test peut aider les candidats à économiser les temps et les efforts. L'outil de formation est bien proche que test réel. Vous allez réussir le test 100% avec l'aide de test simulation de Pass4Test. C'est une bonne affaire à prendre le Certificat IT en coûtant un peu d'argent. N'hésitez plus d'ajouter l'outil de formation au panier.
Chaque expert dans l'équipe de Pass4Test ont son autorité dans cette industrie. Ils profitent ses expériences et ses connaissances professionnelles à préparer les documentations pour les candidats de test Certification IT. Les Q&As produites par Pass4Test ont une haute couverture des questions et une bonne précision des réponses qui vous permettent la réussie de test par une seule fois. D'ailleurs, un an de service gratuit en ligne après vendre est aussi disponible pour vous.
Pass4Test est un site professionnel qui répondre les demandes de beaucoup clients. Les candidats qui ont déjà passer leurs premiers test Certification IT ont devenus les suivis de Pass4Test. Grâce à la bonne qualité des documentations, Pass4Test peut aider tous candidats à réussir le test IBM C6040-753.
C2180-605 Démo gratuit à télécharger: http://www.pass4test.fr/C2180-605.html
NO.1 An integration developer is designing an XML map that combines the firstName and lastName
elements of the source into a single fullName element in the target. In addition, the fullName element
must be formatted with the lastName first, followed by a comma and then the firstName.
Which transform type would be the most appropriate for this situation?
A. Move
B. Concat
C. Append
D. Assign
Answer: B
IBM examen C2180-605 examen certification C2180-605
NO.2 Two integration developers are working on the same mediation module using WebSphere Integration
Developer. The module code needs to be merged at the end of each day so that the developers start at
the same completion level next day. Which of the following options is the correct way to achieve this with
respect to the versioning support in WebSphere Integration Developer? The developers can:
A. continue working on their individual versions of the projects and user 'compare projects' feature at the
beginning of each day.
B. continue working on their individual versions of the projects and merge them using a source control tool
at the end of each day.
C. maintain multiple versions of the projects in their respective workspaces and use the 'merge projects'
feature at the end of each day.
D. maintain multiple versions of the projects in their respective workspaces and use the
'synchronize projects' feature at the end of each day.
Answer: B
IBM C2180-605 C2180-605 C2180-605 examen C2180-605 C2180-605 examen
NO.3 An integration developer has been tasked to develop a mediation module that integrates a legacy J2EE
application deployed on a remote server. The legacy application is exposed through an EJB facade and
the integration developer decides to use an EJB import. What is the most suitable approach to configure it?
The integration developer should:
A. add the corresponding EJB client project to the module dependencies and select the EJB local
interface for the import.
B. import the corresponding EJB client project into the workspace and select the EJB remote interface for
the import.
C. create a WSDL interface with the same operations as the EJB interface, select it as the import interface
and add the EJB JNDI Name in the binding section.
D. use the external service wizard to point to the EJB through its IIOP URL and the wizard
automatically creates the interface and the business objects for the import.
Answer: B
IBM examen certification C2180-605 certification C2180-605 certification C2180-605 C2180-605 certification C2180-605
NO.4 An integration developer has developed a new mediation flow and wants to test it on a new embedded
server profile. How should the integration developer proceed in order to perform this testing as efficiently
as possible?
A. Build the EAR file inWebSphere Integration Developer, then deploy it via serviceDeploy on the server.
B. Build the EAR file inWebSphere Integration Developer, then deploy it via the server's administrative
console.
C. In WebSphere Integration Developer, in the Servers tab, add a new server and enter the connection
details of the server.
D. InWebSphere Integration Developer, import the server via File>Import>Server and enter the
connection details of the server.
Answer: C
certification IBM C2180-605 certification C2180-605 C2180-605 examen
NO.5 Refer to the Exhibit.
The Assembly Diagram represents an existing StockQuote mediation module. The mediation module
must be enhanced to create a record in a billing system whenever a stock quote is executed. What must
be done to the Assembly Diagram to implement the enhancement?
A. Add a newBillingService import with an appropriate interface.
Add a new reference to the StockQuote mediation flow component.
Wire the new reference to the new BillingService import.
B. Add a newBillingService export with an appropriate interface.
Add a new reference to the StockQuote mediation flow component.
Wire the new reference to the new BillingService export.
C. Add a newBillingService import with an appropriate reference.
Add a new interface to the mediation flow component.
Wire the new interface to the new BillingService import.
D. Add a newBillingService export with an appropriate reference.
Add a new interface to the mediation flow component.
Wire the new interface to the new BillingService export.
Answer: A
certification IBM C2180-605 examen certification C2180-605 C2180-605 examen
NO.6 An integration developer is developing a mediation module using the WebSphere Integration Developer.
The mediation module interacts with different databases, via the database lookup mediation primitive and
an Enterprise Information system (EIS) binding. It is expected that during the lifetime of this solution, the
databases connection details will change. The customer wants to avoid downtime of the applications as
much as possible. What is the BEST way for the integration developer to implement a solution so that
when database connection details change, downtime is minimized?
A. Update the details of the database connections,then deploy the updated EAR file.
B. Define the various database connection details asWebSphere Variables. When a change in the
connection details occurs, update the WebSphere Variables on the server and restart the server.
C. Define the various database connections used as JNDI names. When a change in the
connection details occurs, update the JNDI details on the server and restart the application.
D. Define a properties file for the application to load on startup. When a change in the connection details
occurs, update the details in the properties file and restart the application.
Answer: C
IBM C2180-605 certification C2180-605 C2180-605
NO.7 A client wants to invoke a mediation module that contains a mediation flow. Which of the following
export bindings with Request-Response interface will ensure that the mediation flow is invoked
asynchronously with callback by the client?
A. HTTP
B. Web services (SOAP/JMS)
C. Web services (SOAP/HTTP)
D. WebSphere MQ or WebSphere MQ-JMS
Answer: D
IBM examen C2180-605 C2180-605 examen
NO.8 A mediation module must be designed to participate in a transaction initiated by a client component.
Which of the following settings should be used by the integration developer to meet the transaction
requirements for the mediation module?
A. Set the Transaction qualifier to False and the Join transaction qualifier to True.
B. Set the Transaction qualifier to Global and the Join transaction qualifier to True.
C. Set the Transaction qualifier to Local and the Join transaction qualifier to False.
D. Set the Transaction qualifier to True and the Join transaction qualifier toTrue.
Answer: B
IBM examen C2180-605 certification C2180-605 certification C2180-605 C2180-605 examen certification C2180-605
没有评论:
发表评论