Aujoud'hui, c'est une société de l'informatique. Beaucoup d'organisations peut provider l'outil de se former pour le test Certification IBM C4040-129. Mais on doit admettre que ces site n'ont pas la capacité à offrir une bonne Q&A, elles sont généralement très vagues et sans les points. C'est loin d'attirer les attentions des candidats.
Le temps est tellement précieux dans cette société que une bonn façon de se former avant le test IBM C4040-129 est très important. Pass4Test fait tous efforts à assurer tous les candidats à réussir le test. Aussi, un an de mise à jour est gratuite pour vous. Si vous ne passez pas le test, votre argent sera tout rendu.
Code d'Examen: C4040-129
Nom d'Examen: IBM (IBM i 7.1 Administration)
Questions et réponses: 164 Q&As
Pass4Test est un site web qui vous donne plus de chances à passer le test de Certification IBM C4040-129. Le résultat de recherche sortis par les experts de Pass4Test peut assurer que ce sera vous ensuite qui réussirez le test IBM C4040-129. Choisissez Pass4Test, choisissez le succès. L'outil de se former de Pass4Test est bien efficace. Parmi les gens qui ont déjà passé le test, la majorité a préparé le test avec la Q&A de Pass4Test.
On doit faire un bon choix pour passer le test IBM C4040-129. C'est une bonne affaire à choisir la Q&A de Pass4Test comme le guide d'étude, parce que vous allez obtenir la Certification IBM C4040-129 en dépensant d'un petit invertissement. D'ailleur, la mise à jour gratuite pendant un an est aussi gratuite pour vous. C'est vraiment un bon choix.
C4040-129 Démo gratuit à télécharger: http://www.pass4test.fr/C4040-129.html
NO.1 A customer is upgrading an HMC to a new release using Recovery DVD5 for the new release
level. Which action must be completed before performing the upgrade from DVD process?
A. Run the 'HMC Management> Back Up HMC Data' to DVD.
B. Run the 'HMC Management> Save Upgrade Data' to HMC disk.
C. Run the 'HMC Management> Back Up HMC Data' to NFS server.
D. Run the 'HMC Management> Save Upgrade Data' to the administrator's PC.
Answer: B
IBM certification C4040-129 C4040-129
NO.2 A Power 720 currently has its firmware update policy set to Os Managed. Which statement is
correct?
A. Server firmware updates will always be disruptive.
B. IPLing from the A side of any partition will activate the new server firmware.
C. Only the Service partition needs PTEs to be installed for the new server firmware to be
immediately activated.
D. Only the Managing partition needs PTF5 to be installed for the new server firmware to be
temporarily activated.
Answer: B
certification IBM certification C4040-129 certification C4040-129 C4040-129 examen
NO.3 Journaling of a large library is running on SYSTEMA and the journal is system managed.
Remote journaling to
SYSTEMB has been configured. Due to a communications problem between SYSTEMA and SYSTEMB,
remote journaling is not working and cannot be quickly restarted.
Disk utilization on SYSTEMA is increasing rapidly. To reduce disk utilization the administrator tries to
delete journal receivers on SYSTEMA. Attempts fail and the following message displays:
CPF705F: Receiver not replicated to 1 remote journals.
What must the administrator do to delete journal receivers on SYSTEMA?
A. Delete and recreate only the journal, and then delete the receivers.
B. Stop journaling, as this must be ended first, and then delete the receivers.
C. Use the DLTJRNRCV command and change the delete option parameter to ignore target receivers.
D. Use the CHGJRN command to change the Manage Receivers parameter to allow user
management of journal receivers and then delete the receivers.
Answer: C
certification IBM C4040-129 certification C4040-129 certification C4040-129
NO.4 A company has just purchased a new POWER7 server running IBM i 7.1 to replace an older
system running V5R4M5. Due to a mistake by a programmer on the V5R4 system, data was
accidently deleted. To recover, the administrator backs up the deleted data to virtual tape on the
7.1 server and attempts to restore it on the V5R4 server. The restore on the V5R4 server fails with a
message stating the data was saved from a more recent release of the operating system.
Which option will solve this problem?
A. Save the data to physical media.
B. Set the target release parameter to V5R4M0 when saving the data.
C. ETP the virtual tape image catalog from the 7.1 server using binary mode.
D. Use the target release parameter *RECOVER and the access path parameter set to VSR4MO.
Answer: B
IBM examen C4040-129 examen C4040-129 examen C4040-129 C4040-129
NO.5 Which graphical tool will help identity additional details about activity on the system, to
isolate the root cause of performance problems?
A. PEX
B. iDoctor
C. Performance Monitor
D. Communications Trace
Answer: B
IBM certification C4040-129 C4040-129 certification C4040-129 C4040-129
NO.6 A disaster recovery test is being performed, using backups from a production system. The
backup process is as follows:
Full system save, using GO SAVE Option 21, for weekly backup
SAVCHGOBJ LIB(*ALL) is used for daily library backup, in addition to DLO and IFS saves
The disaster recovery test is at the point where libraries are ready to be restored
Which pair of actions will restore the libraries to the most recent save point, in the minimum
amount of time?
A. Use RSTLIB(*NONSYS) to restore all libraries and object from the SAVE 21 weekly save. For
each daily tape, run a RSTLIB for each library saved by SAVCHGOBJ.
B. Use RSTLIB(*NONSYS) to restore all libraries and object from the SAVE 21 weekly save. Then
run a RSTOBJ for each library saved by SAVCHGOBJ on the most recent daily tape.
C. Run RSTOBJ for each library saved by SAVCHGOBJ on the most recent daily tape.
Then run RSTLIB(*NONSYS) OPTION(*NEW) to restore the remaining libraries and objects from
the SAVE 21 weekly save.
D. For each daily tape, run RSTOBJ for each library saved by SAVCHGOBJ on the daily tapes.
Then run RSTOBJ(*NONSYS) OPTION(*NEW) to restore the remaining libraries and objects from
the SAVE 21 weekly save.
Answer: B
certification IBM C4040-129 examen C4040-129 C4040-129 certification C4040-129 C4040-129
NO.7 Due to an application problem, management has requested the IPL of a partition running IBM i
7.1. The administrator initiates the IPL, and during the restart phase notices the IPL is running in
manual mode even though the HMC partition settings indicate B NORMAL.
Why is the IPL running in manual mode?
A. The PWRDWNSYS command restart parameter is set to *MANUAL.
B. Manual is the default IPL mode when there is a console problem.
C. The QIPLTYPE system value is set to "Attended IPL, Console in debug mode".
D. Manual is the default IPL mode when the previous system end indicator is abnormal.
Answer: C
certification IBM certification C4040-129 C4040-129 examen C4040-129 examen C4040-129
NO.8 Which statement describes server firmware delivery that uses PTF5 on a POWER7 system?
A. A single IBM i (57703S1) PTF is ordered to update server firmware.
B. The firmware is ordered using the marker PTF ID, such as MHxxxxx, and is installed with normal
IBM i PTE commands.
C. The server firmware PTE (MFxxxxx) is ordered from the connected HMC and is sent to the service
partition for install.
D. The HIPER PTF group is ordered for the Licensed Internal Code (5770999) and the order is flagged
with Include Firmware Update *YES.
Answer: A
IBM examen C4040-129 examen C4040-129 C4040-129
NO.9 What are the key benefits provided by database journaling?
A. Can send updates concurrently to a second system Can back out incomplete transactions Can
reduce system I/O workload
B. Can reduce application complexity Can back out incomplete transactions Can maintain database
integrity in the case of an unexpected outage
C. Can send updates concurrently to a second system Can increase performance Can maintain
database integrity in the case of an unexpected outage
D. Can send updates concurrently to a second system Can back out incomplete transactions and
commitment control Can maintain database integrity in the case of an unexpected outage
Answer: D
certification IBM certification C4040-129 C4040-129 C4040-129 C4040-129 examen C4040-129
NO.10 Several IBM i partitions at a customer site provide outdated contact information to IBM when
problems are reported. Which command should be used to correct the contact information?
A. CHGSVCCFG
B. CHGCNTINF
C. SNDSRVRQS *UPD
D. WRKCNTINE, option 2
Answer: D
IBM C4040-129 C4040-129 examen C4040-129
NO.11 A batch job runs daily in the QBATCH subsystem with a run priority of 50. The job normally
takes an hour to complete and no other batch jobs run during this time.
The administrator needs to reduce the run time and requests the run priority be lowered to 40.
However1 after the change, run time does not decrease.
What is the likely reason that the run time did not decrease?
A. The run priority applies to only interactive jobs.
B. D82 Symmetric Multiprocessing has not been installed.
C. The run priority represents only the relative importance of the job.
D. The system value QPFRADJ (Performance Adjustment) is set to "No adjustment."
Answer: C
IBM examen C4040-129 C4040-129
NO.12 The threshold limit has been reached for the system ASP on a system running IBM i 7.1 .
There are some disk units configured to a user ASP available. Business continuing policy prevents
the administrator from stopping the system.
How could the system administrator correct the storage problem in the system ASP?
A. Increase the ASP threshold above the currently utilized storage.
B. Concurrently remove available disk units from user ASP using the "Remove units from
configuration" SST option and add them to system ASP .
C. Switch to the backup system using an HA solution and restart the original system to DST. Remove
the available disk units from user ASP and add them to system ASP .
D. Initiate a control panel function 21 to activate DST on the system console for the affected
partition. Use the DST feature to compress the parity stripe to increase available storage.
Answer: B
IBM C4040-129 examen C4040-129 C4040-129 certification C4040-129
NO.13 An administrator maintains four image catalogs on a host partition that are used by
network-based virtual optical drives. Periodically, images are added or removed from the catalog
and it must be re-exported.
What is the simplest method to update the share and NES export?
A. Create a CL program.
B. Create a REXX program.
C. Create a Qshell script.
D. Run the statements manually as needed.
Answer: B
IBM C4040-129 certification C4040-129 C4040-129 examen C4040-129
NO.14 An administrator needs to restore a physical file DATALIB/SMALLFILE from a Save 21 backup
of library DATALIB. DATALIB has several hundred large database files plus other objects.
The administrator has the job log and output from the last full save of DATALIB.
What should the administrator do to restore SMALLFILE in the shortest time?
A. Run the RST command for object "/QSYS.LIB/DATALIB.LIB/SMALLFILE.FILE"
B. Delete SMALLFILE, run RSTLIB specifying *NEW objects, and specify library DATALIB as the
starting library.
C. Run RSTLIB for library DATALIB specifying the position parameter for SMALLFILE in library DATALIB
from the output of the save.
D. Run RSTOBJ for DATALIB/SMALLFILE specifying the position and sequence number for SMALLFILE
in library DATALIB from the output of the save.
Answer: D
IBM certification C4040-129 C4040-129 C4040-129
NO.15 An administrator has been asked to update an IBM i 7.1 system to the most current
Technology Refresh available from IBM. Which method is the most appropriate to achieve the
update?
A. Perform a D-mode IPL using the Technology Group PTF package SF99707.
B. Perform a slip install using the most current 1_Base_01 resave media available.
C. Perform a scratch install using the most current 1_Base_01 resave media available.
D. Perform an install of the Technology Group PTF package SF99707 using the GO PTF menu.
Answer: D
IBM C4040-129 C4040-129 examen C4040-129 examen C4040-129
Nous croyons que pas mal de candidats voient les autres site web qui offrent les ressources de Q&A IBM C4040-129. En fait, le Pass4Test est le seul site qui puisse offrir la Q&A recherchée par les experts réputés dans l'Industrie IT. Grâce à la Q&A de Pass4Test impressionée par la bonne qualité, vous pouvez réussir le test IBM C4040-129 sans aucune doute.
没有评论:
发表评论