L'équipe de Pass4Test se composant des experts dans le domaine IT. Toutes les Q&As sont examinées par nos experts. Les Q&As offertes par Pass4Test sont réputées pour sa grande couverture ( presque 100%) et sa haute précision. Vous pouvez trouver pas mal de sites similaires que Pass4Test, ces sites peut-être peuvent vous offrir aussi les guides d'études ou les services en ligne, mais on doit admettre que Pass4Test peut être la tête de ces nombreux sites. La mise à jour, la grande couverture des questions, la haute précision des réponses nous permettent à augmenter le taux à réussir le test Certification SAP C_TADM53_70. Tous les points mentionnés ci-dessus seront une assurance 100% pour votre réussite de test Certification SAP C_TADM53_70.
Vous allez choisir Pass4Test après essayer une partie de Q&A SAP C_TADM53_70 (gratuit à télécharger). Le guide d'étude produit par Pass4Test est une assurance 100% à vous aider à réussir le test Certification SAP C_TADM53_70.
C'est un bon choix si vous prendre l'outil de formation de Pass4Test. Vous pouvez télécharger tout d'abord le démo gratuit pour prendre un essai. Vous aurez plus confiances sur Pass4Test après l'essai de notre démo. Si malheureusement, vous ne passe pas le test, votre argent sera tout rendu.
Pass4Test a une équipe se composant des experts qui font la recherche particulièrement des exercices et des Q&As pour le test certification SAP C_TADM53_70, d'ailleurs ils peuvent vous proposer à propos de choisir l'outil de se former en ligne. Si vous avez envie d'acheter une Q&A de Pass4Test, Pass4Test vous offrira de matériaux plus détailés et plus nouveaux pour vous aider à approcher au maximum le test réel. Assurez-vous de choisir le Pass4Test, vous réussirez 100% le test SAP C_TADM53_70.
La Q&A SAP C_TADM53_70 de Pass4Test est liée bien avec le test réel de SAP C_TADM53_70. La mise à jour gratuite est pour vous après vendre. Nous avons la capacité à vous assurer le succès de test SAP C_TADM53_70 100%. Si malheureusement vous échouerez le test, votre argent sera tout rendu.
Code d'Examen: C_TADM53_70
Nom d'Examen: SAP (System Administration (MS SQL DB) with SAP NetWeaver 7.0)
Questions et réponses: 80 Q&As
Pass4Test possède un l'outil de formation particulier à propos de test SAP C_TADM53_70. Vous pouvez améliorer les techniques et connaissances professionnelles en coûtant un peu d'argent à courte terme, et vous preuver la professionnalité dans le future proche. L'outil de formation SAP C_TADM53_70 offert par Pass4Test est recherché par les experts de Pass4Test en profitant les expériences et les connaissances riches.
Dans cette époque glorieuse, l'industrie IT est devenue bien intense. C'est raisonnable que le test SAP C_TADM53_70 soit un des tests plus populaires. Il y a de plus en plus de gens qui veulent participer ce test, et la réussite de test SAP C_TADM53_70 est le rêve pour les professionnels ambitieux.
C_TADM53_70 Démo gratuit à télécharger: http://www.pass4test.fr/C_TADM53_70.html
NO.1 Which of the following is true when creating new clients within an SAP System based on AS ABAP (for
example, SAP ECC).?
A. Customizing and repository objects from a source client are automatically copied to the new client
using the client copy tool.
B. Remote client copies generate large data files at the operating system level.
C. Log files indicating the success of a new client creation are stored in the home directory of the user
initiating the copy.
D. The client transport tool can be used to transfer the same source client, simultaneously, from one SAP
System to multiple other SAP systems in a single action.
E. The client copy can be accelerated by using several dialog work processes in parallel.
Answer: E
SAP C_TADM53_70 C_TADM53_70
NO.2 Which of the following terms are correlated to the (ABAP-based) SAP system monitoring infrastructure?
(Choose two)
A. Alert Memory
B. Alert Server
C. Data Supplier
D. Monitoring Tree Element
Answer: C,D
certification SAP C_TADM53_70 C_TADM53_70 C_TADM53_70
NO.3 Which program, on the operating system level, performs and controls transports between ABAP based
SAP-systems? Note that this program is controlled by your actions, for example in transactions SE09
(Transport Organizer) and STMS (Transport Management System).
A. transport.exe
B. RDDIMPDP.bat
C. import.exe
D. RDDEXPPP.exe
E. tp.exe
Answer: E
SAP examen C_TADM53_70 C_TADM53_70
NO.4 Which of the following statements regarding the functions offered by CCMS-based monitoring are true?
(Choose two)
A. It is possible to monitor more than one SAP system by using the functions offered by CCMS
monitoring.
B. Correctly configured threshold values to be used for monitoring purposes can be switched by using
operation modes.
C. You need a special key (generated within SAP Solution Manager) to create your own monitor
definitions in transaction RZ20.
Answer: A,B
certification SAP C_TADM53_70 examen C_TADM53_70 C_TADM53_70 C_TADM53_70 C_TADM53_70 examen
NO.5 How many clients can exist per AS ABAP-based SAP system?
A. The maximum numberis 1000 clients per SAP system
B. As many as you want
C. The number of clients per system is limited to 500
Answer: A
SAP C_TADM53_70 C_TADM53_70 C_TADM53_70 C_TADM53_70
NO.6 Which of the following statements regarding the client concept and the client copy tools in ABAP-based
SAP Systems (for example, SAP ECC) are true? (Choose three)
A. Application data can only be copied from one client to another, when all client-specific customizing is
also copied.
B. Clients can be copied between SAP Systems of the same release.
C. Client-independent customizing is always automatically copied between clients.
D. User master records cannot be copied between clients.
E. Clients can be copied within a single SAP System.
Answer: A,B,E
certification SAP certification C_TADM53_70 certification C_TADM53_70 C_TADM53_70 examen
NO.7 The customer has decided to implement a three system landscape for SAP ECC 6.0. A lot of
customizing and development work must be done before the SAP landscape goes live. Someone has
recommended using virtual systems in the beginning, instead of buying physical hardware. Which
statements regarding virtual systems are true? (Choose three)
A. Virtual systems are used to save money in the beginning of a project. Another side-effect is that the
productive SAP system can always be installed on the newest hardware technology.
B. Virtual systems are mainly used to simulate the correctness of transport routes.
C. The <SID> of the virtual system should be the same as the planned physical system.
D. Virtual systems are used in the transport environment like physical systems. Transport buffers,
command files and data files are created.
E. Virtual systems in the SAP transport environment are only used together with hypervisor technologies
from different third-party vendors.
Answer: A,C,D
SAP C_TADM53_70 examen C_TADM53_70 examen C_TADM53_70
NO.8 After establishing a three-system landscape transport environment for SAP systems based on AS ABAP,
a developer has released a transport request in the DEV system. You now receive a mail with the
transport request number from the developer and your job is to import this request into the QAS system.
However, even after pressing the refresh button several times, the import queue of the QAS systems
seems to be empty. Which of the following are possible reasons for this problem? (Choose two)
A. The systems DEV and QAS belong to different transport groups.
B. The repository objects in this transport request belong to a package (formerly development class) that
points to a transport layer, which in turn does not point to the QAS system.
C. You do not have the necessary authorizations to refresh the import queue of the QAS system.
D. A virtual system exists in your transport landscape. Once you have a virtual system in your transport
landscape the import buffers are empty.
Answer: A,B
SAP C_TADM53_70 examen C_TADM53_70 certification C_TADM53_70 C_TADM53_70
NO.9 Which features are created automatically once you define a transport domain controller in an
(ABAP-based) SAP landscape? (Choose four)
A. The transport profile for the transport control program tp is generated in the file system.
B. The TMS configuration is stored in the database and the file system.
C. The transport profile for the transport control program tp is generated in the database.
D. The user TMSADM is created.
E. The RFC destinations required for the TMS are generated.
Answer: A,B,D,E
SAP examen certification C_TADM53_70 C_TADM53_70 C_TADM53_70
NO.10 Which of the following statements concerning the Change and Transport System are correct? (Choose
two)
A. The transport directory is given by the parameter DIR_TRANS.
B. Small corrections on ABAP programs can be done safely in the production system.
C. Newly created (and empty) customizing change requests always have one or more tasks.
Answer: A,C
SAP C_TADM53_70 C_TADM53_70
NO.11 Which of the following are repository objects in an AS ABAP-based SAP system? (Choose two)
A. Programs
B. Buffer areas
C. Screens (Dynpros)
D. Client-independent customizing settings
Answer: A,C
certification SAP C_TADM53_70 C_TADM53_70
NO.12 Concerning some (CCMS) monitoring terminology, which of the following statements are correct?
(Choose three)
A. Each MTE can only be used in exactly one customer-defined monitor definition at a time.
B. Each monitoring attribute is assigned to exactly one monitoring object.
C. A monitoring attribute is also a monitoring tree element (MTE).
D. A monitoring object can have more than one assigned monitoring attribute.
Answer: B,C,D
SAP C_TADM53_70 examen C_TADM53_70 C_TADM53_70
NO.13 After the installation of an SAP ECC 6.0 three-system landscape, you plan to apply a Support Package
stack to the Development system. Which statements concerning support packages for ABAP based SAP
Systems are true? (Choose two)
A. To use the SPAM transaction, you need to configure the transport environment with STMS in the client
000.
B. If there are modification adjustments necessary, transaction SPAM does not start the import. You need
to perform these adjustments before importing the Support Package.
C. To use the SPAM, a valid transport landscape must have been created.
D. To use the SPAM transaction, you need to configure the transport environment with transaction STMS
in the client 066 with user DDIC.
Answer: A,C
SAP C_TADM53_70 C_TADM53_70 examen certification C_TADM53_70
NO.14 You want to use the Change and Transport System (CTS) to perform transports of non-ABAP objects
into non-ABAP systems. Which configuration settings are necessary for this?
A. The transport domain controller system must be based on SAP NetWeaver AS 7.00 SP Stack 12 or
higher.
B. You must use client-dependent transport routes for all systems in your transport domain.
C. You need to adjust certain tp parameters for the non-ABAP systems in question.
D. The CTS Deploy Web Service must be configured.
Answer: A,C,D
SAP C_TADM53_70 C_TADM53_70 examen C_TADM53_70
NO.15 Which of the following options are available as global settings when setting the 'System change option'
in SAP Systems (transaction SE06)? (Choose two)
A. Not modifiable
B. An option to allow changes to Repository and client-independent customizing object
C. Original objects modifiable
D. Repaired objects modifiable
E. Modifiable
Answer: A,E
certification SAP C_TADM53_70 examen C_TADM53_70 examen C_TADM53_70 certification C_TADM53_70
Le produit de Pass4Test est réputée par une bonne qualité et fiabilité. Vous pouvez télécharger le démo grantuit pour prendre un essai, nons avons la confiance que vous seriez satisfait. Vous n'aurez plus de raison à s'hésiter en face d'un aussi bon produit. Ajoutez notre Q&A au panier, vous aurez une meilleure préparation avant le test.
没有评论:
发表评论