On doit faire un bon choix pour passer le test Oracle 1Z0-554. C'est une bonne affaire à choisir la Q&A de Pass4Test comme le guide d'étude, parce que vous allez obtenir la Certification Oracle 1Z0-554 en dépensant d'un petit invertissement. D'ailleur, la mise à jour gratuite pendant un an est aussi gratuite pour vous. C'est vraiment un bon choix.
Il y a plusieurs de façons pour réussir le test Oracle 1Z0-554, vous pouvez travailler dur et dépenser beaucoup d'argents, ou vous pouvez travailler plus efficacement avec moins temps dépensés.
Pass4Test est un site particulier à offrir les guides de formation à propos de test certificat IT. La version plus nouvelle de Q&A Oracle 1Z0-554 peut répondre sûrement une grande demande des candidats. Comme tout le monde le connait, le certificat Oracle 1Z0-554 est un point important pendant l'interview dans les grandes entreprises IT. Ça peut expliquer un pourquoi ce test est si populaire. En même temps, Pass4Test est connu par tout le monde. Choisir le Pass4Test, choisir le succès. Votre argent sera tout rendu si malheureusement vous ne passe pas le test Oracle 1Z0-554.
Beaucoup de gens trouvent difficile à passer le test Oracle 1Z0-554, c'est juste parce que ils n'ont pas bien choisi une bonne Q&A. Vous penserez que le test Oracle 1Z0-554 n'est pas du tout autant dur que l'imaginer. Le produit de Pass4Test non seulement comprend les Q&As qui sont impressionnées par sa grande couverture des Questions, mais aussi le service en ligne et le service après vendre.
C'est sûr que le Certificat Oracle 1Z0-554 puisse améliorer le lendemain de votre carrière. Parce que si vous pouvez passer le test Oracle 1Z0-554, c'est une meilleure preuve de vos connaissances professionnelles et de votre bonne capacité à être qualifié d'un bon boulot. Le Certificat Oracle 1Z0-554 peut bien tester la professionnalité de IT.
Code d'Examen: 1Z0-554
Nom d'Examen: Oracle (Oracle Application Development Framework 11g Essentials)
Questions et réponses: 88 Q&As
Le test Oracle 1Z0-554 est une examination de techniques professionnelles dans l'Industrie IT. Pass4Test est un site qui peut vous aider à réussir le test Oracle 1Z0-554 rapidement. Si vous utiliser l'outil de formation avant le test, vous apprendrez tous essences de test Certification Oracle 1Z0-554.
1Z0-554 Démo gratuit à télécharger: http://www.pass4test.fr/1Z0-554.html
NO.1 In which two places do you configure managed beans?
A.In the page definition file
B.In the faces-config.xml file
C.In the adfc-config.xml file
D.In the Property Inspector
E.In the task flow definition files
Answer: B,D
Oracle 1Z0-554 certification 1Z0-554 1Z0-554 examen
NO.2 You select a binding In the page definition file and set the ChangeEventPolicy property to ppr.
What effect does this action have on the way the page is rendered?
A.It allows a component to partially refresh another component whose partialSubmit property is set to
true.
B.When a user selects a new value In a field, the portion of the page where that component resides is
redrawn.
C.It enables you to add a component as a partial target for an event, so that when that event is triggered,
the partial target component is refreshed.
D.Components whose values change as a result of back-end logic are automatically repainted.
Answer: A
Oracle certification 1Z0-554 1Z0-554 1Z0-554 1Z0-554
NO.3 You want to define that a panel box titled should display information about the currently selected
customer: currently editing Customer Surname: <Customer s Last Name> < Credit limit> .If the credit
limit is null, then a zero should be displayed.Furthermore, in case the label for the surname field changes,
this string should reference the ADF Business Components control hints for the label.
A.Currently editing Customer Surname: # { bindings.CustLastName.Input Value} # {bindings.
CreditLimit.inputValue}
B.Currently editing # {bindings.CustName.Hints.label}: #
{bindings.CustLastName.InputValue} # {empty bindings.CreditLimit.inputValue ? 0 : bindings.
CreditLimit.InputValue}
C.Currently editing # {bindings.CustName.Hints.label}: #
{bindings.CustLastName.InputValue} # {Null bindings.CreditLimit.inputValue ? 0 :
D.Currently editing # {bindings.CustName.Hints.label}: #
bindings.CustLastName.InputValue} # {if empty bindings.CreditLimit.inputValue
then 0 else bindings.CreditLimit.INputValue}
Answer: B
Oracle examen 1Z0-554 1Z0-554 certification 1Z0-554
NO.4 Identify two advantages that ADF Model offers the developer.
A.It insulates the developer from needing to know about the specifics of the underlying business services
implementation.
B.It enables the developer to abstract application navigation from the physical pages.
C.It saves time In that it allows the developer to quickly build business services from database tables.
D.It enables the developer to bind UI components directly to tables and columns in the database.
E.It provides the developer with a generalized approach to binding services and UI components.
Answer: A,E
Oracle certification 1Z0-554 1Z0-554 1Z0-554
NO.5 You have found a declarative component that you would like to use on one of the pages that you are
designing.
Choose the correct sequence of steps to add the component to the page.
A.Select the ADF library from the Component Palette.Add the ADF library to the current project.
Select the declarative component and drag it to the page.Deploy the component's project as an ADF
library JAR file.
B.Deploy the component's project as an ADF library JAR file.
Add the ADF library to the current project.
Select the ADF library from the Component Palette.
Select the declarative component and drag it to the page.
C.Add the ADF library to the current project.
Select the ADF library from the Component Palette.
Select the declarative component and drag it to the page.
Deploy the component's project as an ADF library JAR file.
D.Deploy the component's project as an ADF library JAR file.
Select the ADF library from the Component Palette.
Select the declarative component and drag it to the page.
Add the ADF library to the current project.
E.Deploy the component's project as an ADF library JAR file.
Select the ADF library from the Component Palette.
Add the ADF library to the current project.
Select the declarative component and drag it to the page.
Answer: A
Oracle 1Z0-554 examen certification 1Z0-554 1Z0-554 examen 1Z0-554
NO.6 Your application contains an entity object, OrdersEO.You decide to create an updatable view object
SpecialOrdersVO, to handle orders that contain not-from-stock items.
How will SpecialOrdersVO and OrdersEO interact to retrieve data about special orders?
A.OrdersEO retrieves the data from the database and validates it; SpecialOrdersVO then queries the
entity object's cache
B.SpecialOrdersVO queries the database; the retrieved data is validated in the entity object, and then
saved to the entity object's cache
C.SpecialOrdersVO queries the OrdersEO entity object to retrieve data about special orders; the data is
then saved in the view object's cache
D.SpecialOrdersVO queries the OrdersEO cache; the data is validated by the entity object, and then the
two objects are synchronized with the database
Answer: B
certification Oracle 1Z0-554 examen certification 1Z0-554 1Z0-554 1Z0-554
NO.7 For a Customers view object, you have defined a view criteria to show only U.S.customers.On an ADF
Faces page, you already have an ADF Faces table displaying data from the Customers view object.
How would you display a query panel on the page that will allow you to select the view criteria and filter
the existing Customers table on the page.?
A.Drag the view criteria as a query panel.
B.Drag the view criteria to the existing table and select query panel with table.
C.Drag the view criteria as a query panel, and then set the ID property of the query panel to reference the
table.
D.Drag the view criteria as a query panel, and then set the Resultcomponent ID property of the query
component to reference the table.
E.Drag the view criteria as a query panel, and then set the Model property of the query component to
reference the table binding.
F.Drag the view criteria as a query panel, and then set the value property of the query component to
reference the table binding.
Answer: D
Oracle 1Z0-554 certification 1Z0-554 1Z0-554 1Z0-554
NO.8 An application module is named MyAppModule.No Java component is defined for the module but the
application does define a base class that extends racle.jbo.serverAppiicationModuleimp1.
Which two statements are true in this scenario?
A.Code In the base class will only be implemented if MyAppModuleApp1.java extends the base class.
B.Any code in the base class will be implemented by MyAppModule.
C.No code in the base class will be implemented because an application-specific Java component named
MyAppModuleImp1.java does not exist.
D.Any code in the base class will be implemented by MyAppModuleDefimp1.java.
E.The MyAppModule.xml definition will include a reference to the base class.
Answer: B
certification Oracle certification 1Z0-554 certification 1Z0-554 1Z0-554 1Z0-554
NO.9 You are debugging an application module method that seems to be causing an error when the argument
value is anything but "2".How could you most efficiently debug this issue?
A.Set a breakpoint on the first line of the method implementation and set the breakpoint property to break
only for threads named oracie.jbo.Exception.
B.Set a breakpoint on the first line of the method implementation and set the breakpoint pass count
property to 2.
C.Set a breakpoint on the first line of the method implementation and set the breakpoint condition to arg !
= 2.
D.Set a breakpoint on the method declaration (where the argument is defined) and step through the
breakpoint at execution to determine the argument value.
E.Set a breakpoint on the method declaration (where the argument is defined) and set the condition to arg
== 2.
Answer: A
Oracle 1Z0-554 1Z0-554 1Z0-554 examen certification 1Z0-554 1Z0-554
NO.10 You have an ADF Faces page which includes input components for A, B and C.On updating either A or
B, you want C to be refreshed automatically.How could you achieve this?
A.Set the PartialTriggers property on A and B to reference
B.Set the PartialTriggers property on C to reference A and B
C.Set the Autosubmit property on A and B to true
D.Set the Autosubmit property on A and B to true, and the PartialTriggers property on C to reference A
and B
E.Set the Autosubmit property on A and B to true and the PartialTriggers property on C to reference C
F.Set the Autosubmit property to true on A, B and C
Answer: E
Oracle 1Z0-554 1Z0-554
Si vous choisissez notre l'outil formation, Pass4Test peut vous assurer le succès 100% du test Oracle 1Z0-554. Votre argent sera tout rendu si vous échouez le test.
没有评论:
发表评论