La Q&A lancée par Pass4Test est bien poupulaire. Pass4Test peut non seulement vous permettre à appendre les connaissances professionnelles, et aussi les expériences importantes résumées par les spécialistes dans l'Industrie IT. Pass4Test est un bon fournisseur qui peut répondre une grande demande des candidats. Avec l'aide de Pass4Test, vous aurez la confiance pour réussir le test. Vous n'aurez pas aucune raison à refuser le Pass4Test.
C'est sûr que le Certificat Juniper JN0-541 puisse améliorer le lendemain de votre carrière. Parce que si vous pouvez passer le test Juniper JN0-541, c'est une meilleure preuve de vos connaissances professionnelles et de votre bonne capacité à être qualifié d'un bon boulot. Le Certificat Juniper JN0-541 peut bien tester la professionnalité de IT.
Pass4Test est un seul site web qui peut offrir toutes les documentations de test Juniper JN0-541. Ce ne sera pas un problème à réussir le test Juniper JN0-541 si vous préparez le test avec notre guide d'étude.
L'équipe de Pass4Test autorisée offre sans arrêt les bonnes resources aux candidats de test Certification Juniper JN0-541. Les documentations particulièrement visée au test Juniper JN0-541 aide beaucoup de candidats. La Q&A de la version plus nouvelle est lancée maintenant. Vous pouvez télécharger le démo gratuit en Internet. Généralement, vous pouvez réussir le test 100% avec l'aide de Pass4Test, c'est un fait preuvé par les professionnels réputés IT. Ajoutez le produit au panier, vous êtes l'ensuite à réussir le test Juniper JN0-541.
Code d'Examen: JN0-541
Nom d'Examen: Juniper (IDP, Associate(JNCIA-IDP))
Questions et réponses: 230 Q&As
JN0-541 Démo gratuit à télécharger: http://www.pass4test.fr/JN0-541.html
NO.1 You update your attack object database on Security Manager. What must you do before the new attack
objects become active on the IDP sensors?
A. You install the updated security policy on the IDP sensor.
B. No changes are required.
C. You must restart the IDP sensor.
D. You must restart the IDP processes on the IDP sensors.
Answer: A
Juniper JN0-541 JN0-541
NO.2 After you enable alerts for new hosts that are detected by the Enterprise Security Profiler, where do you
look in Security Manager to see those alerts?
A. Security Monitor > Profiler > Application Profiler tab
B. Security Monitor > Profiler > Violation Viewer tab
C. Security Monitor > Profiler > Network Profiler tab
D. Log Viewer > Profiler Log
Answer: D
Juniper JN0-541 JN0-541
NO.3 Which statement is true regarding IDP rule matching on a sensor?
A. Each rule in the IDP rule base that matches on the source IP, destination IP, and service will be
processed further.
B. Each rule in the IDP rule base that matches on the source IP, destination IP, and service will be
processed further, unless the particular rule is terminal.
C. Each rule in the IDP rule base that matches on the source IP, destination IP, service, and attack object
will be processed further.
D. Each rule in the IDP rule base that matches on the source IP, destination IP, service, and attack object
will be processed further, unless the particular rule is terminal.
Answer: B
certification Juniper JN0-541 JN0-541 examen JN0-541 JN0-541
NO.4 Which type of cable do you use for a console connection to an IDP sensor?
A. CAT 5 cable
B. Juniper proprietary cable
C. straight-through serial cable
D. null-modem cable
Answer: D
Juniper JN0-541 JN0-541 examen certification JN0-541 certification JN0-541
NO.5 Which two will change the management IP of an IDP sensor? (Choose two.)
A. Edit the existing IDP sensor object in Security Manager GUI and change the IP address.
B. Delete the IDP sensor object from Security Manager and re-add the sensor with the new IP address.
C. Useifconfig to change the management IP address.
D. Use the ACM to change the management IP address.
Answer: B,D
Juniper examen certification JN0-541 JN0-541 examen JN0-541 examen
NO.6 Which command on the IDP sensor CLI can be used to display the sensor statistics, which policy is
installed, and mode of sensor deployment?
A. sctop "s" option
B. sensor statistics can only be displayed from Security Manager GUI
C. scio list s0 sensor stat
D. scio sensor stat
Answer: A
Juniper JN0-541 certification JN0-541
NO.7 A newly re-imaged sensor is running IDP 4.0 code. You want to assign IP address
10.1.1.1 to the sensor. Which method do you use to do this?
A. Connect to the sensor's console port, login as root, and answer theEasyConfig
B. Use SSH to connect to the sensor at IP 192.168.1.1.Login as root, and run ipconfig.
C. Connect to the sensor's console port, login as admin, and answer theEasyConfig
D. Use SSH to connect to the sensor at IP 192.168.1.1.Login as admin, and run ipconfig.
Answer: A
Juniper examen JN0-541 JN0-541
NO.8 Which statement is true about packet capture in the IDP sensor?
A. The Log Viewer has no indication of whether a log message has associated packet captures.
B. You can only log packets after an attack packet.
C. You can configure a particular number of packets to capture before and after an attack.
D. Packet capture records all packets flowing through the sensor.
Answer: C
Juniper JN0-541 JN0-541 examen
NO.9 Which rule base would detect netcat?
A. SYN protector
B. traffic anomalies
C. backdoor
D. exempt
Answer: C
certification Juniper JN0-541 JN0-541 JN0-541 certification JN0-541
NO.10 Which rule base would detect the use of nmap on a network?
A. SYN protector
B. traffic anomalies
C. backdoor
D. exempt
Answer: B
Juniper certification JN0-541 JN0-541 examen certification JN0-541 JN0-541
NO.11 Which statement about the Enterprise Security Profiler (ESP) is true?
A. The ESP must be configured and started using the IDP sensor CLI before it is used.
B. The administrator must manually initiate Security Manager to sensor polling to retrieve ESP data.
C. The ESP must be configured and started on each IDP sensor manually, using the Security Manager
GUI.
D. The ESP is started by default in IDP version 4.0 or newer.
Answer: C
Juniper certification JN0-541 JN0-541 examen JN0-541 certification JN0-541 certification JN0-541
NO.12 What is one use of an IP action?
A. It blocks subsequent connections from specific IP addresses.
B. It modifies the IP header to redirect the attack.
C. It modifies the IP header to prevent the attack.
D. It permits or denies the traffic, based on the IP header.
Answer: A
Juniper JN0-541 examen certification JN0-541 JN0-541 JN0-541
NO.13 Exhibit:
You work as an administrator at Certkiller .com. Study the exhibit carefully. In the exhibit, which SYN
protector mode is the IDP using?
A. passive
B. handshake
C. relay
D. protective
Answer: A
Juniper certification JN0-541 JN0-541 JN0-541 examen JN0-541 examen
NO.14 When connecting to a sensor using SSH, which account do you use to login?
A. admin
B. super
C. netscreen
D. root
Answer: A
Juniper JN0-541 JN0-541 examen JN0-541 certification JN0-541 certification JN0-541
NO.15 What is "a deviation from a protocol's expected behavior or packet format"?
A. context
B. compound attack object
C. attack signature
D. protocol anomaly
Answer: D
certification Juniper JN0-541 examen JN0-541 certification JN0-541 JN0-541
NO.16 On a sensor, which command will indicate if log messages are being sent to Security Manager.?
A. scio vr list
B. serviceidp status
C. scio agentstats display
D. scio getsystem
Answer: C
Juniper certification JN0-541 JN0-541
NO.17 Which OSI layer(s) of a packet does the IDP sensor examine?
A. layers 2-7
B. layers 2-4
C. layer 7 only
D. layers 4-7
Answer: A
Juniper examen JN0-541 certification JN0-541 JN0-541
NO.18 Which three fields in a packet must match an IDP rule before that packet is examined for an attack?
(Choose three.)
A. terminate match
B. service
C. destination address
D. source address
E. attack object
Answer: B,C,D
Juniper JN0-541 JN0-541 examen JN0-541
NO.19 Which TCP port is used for communication between Security Manager and an IDP sensor?
A. 7801
B. 7800
C. 7803
D. 443
Answer: C
Juniper JN0-541 JN0-541 examen
NO.20 Which statement is true about the attack object database update process?
A. Each sensor updates its own attack object database automatically; however they must be able to
access the Juniper site on TCP port 443.
B. The attack object database update must be manually performed by the administrator, and the
administrator must manually install it on each sensor.
C. The attack object database update can be initiated manually or automatically.
D. The attack object database update can be automatically scheduled to occur using the Security
Manager GUI.
Answer: C
Juniper examen certification JN0-541 JN0-541 examen
Vous serez impressionné par le service après vendre de Pass4Test, le service en ligne 24h et la mise à jour après vendre sont gratuit pour vous pendant un an, et aussi vous allez recevoir les informations plus nouvelles à propos de test Certification IT. Vous aurez un résultat imaginaire en coûtant un peu d'argent. D'ailleurs, vous pouvez économier beaucoup de temps et d'efforts avec l'aide de Pass4Test. C'est vraiment un bon marché de choisir le Pass4Test comme le guide de formation.
没有评论:
发表评论