Pass4Test a une grande équipe composée des experts d'expérience dans l'industrie IT. Leurs connaissances professionnelles et les recherches font une bonne Q&A, qui vous permet à passer le test IBM 000-611. Dans Pass4Test, vous pouvez trouver une façon plus convenable à se former. Les resources de Pass4Test sont bien fiable. Choisissez Pass4Test, choisissez un raccourci à réussir le test IBM 000-611.
Peut-être vous voyez les guides d'études similaires pour le test IBM 000-611, mais nous avons la confiance que vous allez nous choisir finalement grâce à notre gravité d'état dans cette industrie et notre profession. Pass4Test se contribue à amérioler votre carrière. Vous saurez que vous êtes bien préparé à passer le test IBM 000-611 lorsque vous choisissez la Q&A de Pass4Test. De plus, un an de service gratuit en ligne après vendre est aussi disponible pour vous.
On doit faire un bon choix pour passer le test IBM 000-611. C'est une bonne affaire à choisir la Q&A de Pass4Test comme le guide d'étude, parce que vous allez obtenir la Certification IBM 000-611 en dépensant d'un petit invertissement. D'ailleur, la mise à jour gratuite pendant un an est aussi gratuite pour vous. C'est vraiment un bon choix.
Chaque expert dans l'équipe de Pass4Test ont son autorité dans cette industrie. Ils profitent ses expériences et ses connaissances professionnelles à préparer les documentations pour les candidats de test Certification IT. Les Q&As produites par Pass4Test ont une haute couverture des questions et une bonne précision des réponses qui vous permettent la réussie de test par une seule fois. D'ailleurs, un an de service gratuit en ligne après vendre est aussi disponible pour vous.
Le test IBM 000-611 est l'un très improtant dans tous les tests de Certification IBM, mais c'est toujours difficile à obtenir ce Certificat. La présence de Pass4Test est pour soulager les candidats. L'équipe de Pass4Test peut vous aider à économiser le temps et l'éffort. Vous pouvez passer le test sans aucune doute sous l'aide de notre Q&A.
Code d'Examen: 000-611
Nom d'Examen: IBM (DB2 10.1 DBA for Linux, UNIX, and Windows)
Questions et réponses: 118 Q&As
Si vous vous inscriez le test IBM 000-611, vous devez choisir une bonne Q&A. Le test IBM 000-611 est un test Certification très important dans l'Industrie IT. C'est essentielle d'une bonne préparation avant le test.
000-611 Démo gratuit à télécharger: http://www.pass4test.fr/000-611.html
NO.1 If a single node database is actively being used by applications when a power failure occurs, what
method is used to bring the database back to a consistent state once power has been restored.?
A. Crash recovery
B. Version recovery
C. Disaster recovery
D. Roll-forward recovery
Answer: A
IBM 000-611 000-611 certification 000-611
NO.2 What is the MAX_LOG database configuration parameter used for?
A. To limit how many log files a single transaction can span.
B. To limit the percentage of primary log space a running transaction can consume.
C. To limit the total number of primary and secondary log files a database can consume.
D. To limit the total number of secondary log files a transaction can consume before infinite logging is
enabled.
Answer: B
IBM certification 000-611 000-611 certification 000-611 000-611 examen
NO.3 If the current value for self-tuning memory is: Self Tuning Memory (SELF_TUNING_MEM) = ON
(Inactive) Which statement is true?
A. Self-tuning is occurring only on the instance memory area.
B. The memory tuner is actively tuning the memory on the system.
C. Self-tuning is not occurring because it is waiting for the database to be recycled.
D. Self-tuning is not occurring because there are less than two memory consumers enabled.
Answer: D
IBM examen certification 000-611 000-611 000-611 certification 000-611 000-611
NO.4 Which statement is correct when describing trusted contexts?
A. A trusted context defines a trust relationship for a connection between the database and an external
entity.
B. A trusted context promotes the authorization level of the connection initiator and grants them DBADM
authority.
C. A trusted context defines a trust relationship between a user and a table allowing that user additional
capabilities.
D. A trusted context gives the database connection the ability to bypass auditing since authentication has
already occurred.
Answer: A
certification IBM 000-611 000-611 examen certification 000-611 000-611
NO.5 Due to a hardware failure, it appears that there may be some corruption in database DB_1 as DB2 is
reporting a "bad page". DB2DART is performed for the entire database and it appears that several bad
pages were detected in table space TBSP_1.
What command can be used to recover the database and repair the corruption in table space TBSP_1?
A. RESTART DATABASE
B. RECOVER DATABASE
C. RESTORE TABLESPACE
D. ROLLFORWARD DATABASE
Answer: B
certification IBM 000-611 examen 000-611 examen 000-611 000-611
NO.6 Which command can be used to restore a corrupted database using only the recovery history file?
A. RESTART DATABASE
B. RECOVER DATABASE
C. RESTORE DATABASE
D. ROLLFORWARD DATABASE
Answer: B
IBM 000-611 000-611 000-611 000-611
NO.7 A table named SALES was created as follows:
If management wants to use Label-Based Access Control (LBAC) to protect individual rows in the SALES
table, and the security policy needed (SEC_POLICY) has already been created, what must be done to
protect the table as desired?
A. Associate the SEC_POLICY security policy with the SALES table.
B. Add a column with the DB2SECURITYLABEL data type to the SALES table.
C. Add a column with the DB2SECURITYLABEL data type to the SALES table and then associate the
SEC_POLICY security policy with the table.
D. Add a SECURED WITH clause to every column in the SALES table and then associate the
SEC_POLICY security policy with the SALES table.
Answer: C
IBM examen 000-611 000-611 000-611 examen 000-611 examen
NO.8 What are two types of security label components that can be used with Label-Based Access Control
(LBAC)? (Choose two).
A. Set
B. Tree
C. Group
D. Range
E. Hierarchy
Answer: A,B
IBM 000-611 000-611 examen 000-611 examen 000-611
NO.9 What is the correct procedure for recovering a dropped table when DROPPED TABLE RECOVERY has
been enabled and the database must remain online?
A. Run the RECOVER DATABASE command with the RECOVER DROPPED TABLE option to restore the
database and recover the droppedtable.
B. Run the RECOVER DATABASE command with the RECOVER DROPPED TABLE option to restore the
appropriate table space and recover thedropped table.
C. Restore the database from a backup image that was taken before the table was dropped; run the
ROLLFORWARD DATABASE command withthe RECOVER DROPPED TABLE option to restore the
database and recover the dropped table.
D. Restore the appropriate table space from a backup image that was taken before the table was dropped;
run the ROLLFORWARD DATABASEcommand with the RECOVER DROPPED TABLE option to restore
the appropriate table space and recover the dropped table.
Answer: D
IBM examen certification 000-611 000-611 000-611 000-611
NO.10 Which command will define the alternate diagnostic data directory path as /db2data/db2dump2?
A. db2set ALT_DIAGPATH=/db2data/db2dump2
B. db2set SECONDARY_DIAGPATH=/db2data/db2dump2
C. UPDATE DBM CFG USING ALT_DIAGPATH /db2data/db2dump2
D. UPDATE DBM CFG USING SECONDARY_DIAGPATH /db2data/db2dump2
Answer: C
IBM 000-611 000-611 certification 000-611 certification 000-611
NO.11 What unit of measurement is used to represent the cumulative total cost of a node in a Visual Explain
access plan diagram?
A. CPU cycles
B. Elapsed time, in milliseconds
C. Processing instructions performed
D. Timerons
Answer: D
IBM certification 000-611 000-611 000-611 examen
NO.12 You have an High Availability and Disaster Recovery (HADR) environment set up and you want to read
from the standby database. What must you do?
A. Assign the value ON to the DB2_HADR_ROS registry variable.
B. Assign the value ON to the DB2_HADR_SNAP registry variable.
C. Execute the STOP HADR command to temporarily break the HADR connection to the standby.
D. Execute the TAKEOVER HADR command to instruct the standby database to takeover as the new
primary database.
Answer: A
IBM 000-611 examen 000-611
NO.13 The values of the automatic maintenance database configuration parameters for a database named
SAMPLE are as follows:
What commands must be run to enable real-time statistics collection on the SAMPLE database?
A. UPDATE DB CFG FOR sample USING AUTO_RUNSTATS ON; UPDATE DB CFG FOR sample
USING AUTO_STMT_STATS ON;
B. UPDATE DB CFG FOR sample USING AUTO_TBL_MAINT ON; UPDATE DB CFG FOR sample
USING AUTO_RUNSTATS ON; UPDATE DB CFG FOR sample USING AUTO_STMT_STATS ON;
C. UPDATE DB CFG FOR sample USING AUTO_TBL_MAINT ON; UPDATE DB CFG FOR sample
USING AUTO_RUNSTATS ON; UPDATE DB CFG FOR sample USING AUTO_STATS_VIEWS ON; D.
UPDATE DB CFG FOR sample USING AUTO_RUNSTATS ON; UPDATE DB CFG FOR sample USING
AUTO_STATS_VIEWS ON;
Answer: B
certification IBM 000-611 000-611 000-611 000-611 examen
NO.14 In IBM Data Studio, where can you schedule script-based jobs?
A. Job Console
B. Job Manager
C. Task Manager
D. Utilities Console
Answer: B
IBM examen 000-611 certification 000-611
NO.15 Where are column mask definitions stored?
A. In the table definition
B. In the system catalog
C. In the table space metadata
D. In the database configuration file
Answer: B
certification IBM 000-611 certification 000-611 certification 000-611
Selon les feedbacks les professionnels bien réputés dans l'Industrie IT, Pass4Test est un bon catalyseur de leurs succès. L'outil de formation offert par Pass4Test leur aide d'économiser le temps et l'argent, le plus important est qu'ils aient passé le test IBM 000-611 avec succès. Pass4Test est un fournissur fiable. Vous allez réaliser votre rêve avec l'aide de Pass4Test.
没有评论:
发表评论