Pass4Test est un bon site qui provide la façon efficace à se former à court terme pour réussir le test IBM 000-617, c'est un certificat qui peut améliorer le niveau de vie. Les gens avec le Certificat gagent beaucoup plus que les gens sans Certificat IBM 000-617. Vous aurez une space plus grande à se développer.
Pass4Test est un site d'offrir la bonne Q&A IBM 000-617. Le produit offert par Pass4Test peut vous aider à réussir ce test très difficile. Si vous ajoutez le produit au panier, vous allez économiser le temps et l'effort. Le produiti Pass4Test est bien réputé dans l'Idustrie IT.
Avec la version plus nouvelle de Q&A IBM 000-617, réussir le test IBM 000-617 n'est plus un rêve très loin pour vous. Pass4Test peut vous aider à réaliser ce rêve. Le test simualtion de Pass4Test est bien proche du test réel. Vous aurez l'assurance à réussir le test avec le guide de Pass4Test. Voilà, le succès est juste près de vous.
Code d'Examen: 000-617
Nom d'Examen: IBM (IBM Certified System Admin - DB2 10 System Admin for z/OS)
Questions et réponses: 126 Q&As
Beaucoup de travailleurs espèrent obtenir quelques Certificat IT pour avoir une plus grande space de s'améliorer. Certains certificats peut vous aider à réaliser ce rêve. Le test IBM 000-617 est un certificat comme ça. Mais il est difficile à réussir. Il y a plusieurs façons pour se préparer, vous pouvez dépenser plein de temps et d'effort, ou vous pouvez choisir une bonne formation en Internet. Pass4Test est un bon fournisseur de l'outil formation de vous aider à atteindre votre but. Selons vos connaissances à propos de Pass4Test, vous allez faire un bon choix de votre formation.
Le programme de formation IBM 000-617 offert par Pass4Test comprend les exercices et les test simulation. Vous voyez aussi les autres sites d'offrir l'outil de formation, mais c'est pas difficile à découvrir une grand écart de la qualité entre Pass4Test et les autres fournisseurs. Celui de Pass4Test est plus complet et convenable pour la préparation dans une courte terme.
Selon les anciens test IBM 000-617, la Q&A offerte par Pass4Test est bien liée avec le test réel.
000-617 Démo gratuit à télécharger: http://www.pass4test.fr/000-617.html
NO.1 Which statement describes a DB2 ROLE?
A. A role is a privilege.
B. A role is a USERID.
C. A role is a RACF entity.
D. A role is a database entity.
Answer: D
IBM 000-617 certification 000-617 000-617 000-617 examen
NO.2 In a production DB2 subsystem, the display of database DBFW8401 shows that pages have been
added to the LPL. The indexes for the database have the COPY NO attribute.
Which utility is used to remove these pages from the LPL status?
A. REPAIR
B. RECOVER
C. CHECK INDEX
D. REBUILD INDEX
Answer: D
IBM examen 000-617 examen 000-617 examen 000-617 000-617 examen
NO.3 The standard audit trace has limitations. Which statement is true?
A. You can audit the catalog tables.
B. You can audit every access to a table.
C. You can audit all utilities including DSN1.... ones.
D. You can start a specific audit trace at DB2 startup.
Answer: D
certification IBM certification 000-617 000-617 examen 000-617 examen
NO.4 Which of the following statements is NOT correct regarding the dynamic statement cache?
A. The dynamic statement cache resides in an above-the-bar pool.
B. Performance problems can occur if the dynamic statement cache is too small.
C. The REOPT(VARS) bind option is necessary in order to store the access path for a dynamic SQL
statement in the dynamic statement cache.
D. When updating statistics for an object manually, you need to invalidate statements in the dynamic
statement cache that refer to this object using RUNSTATS REPORT NO UPDATE NONE against the
object.
Answer: C
certification IBM 000-617 certification 000-617 000-617
NO.5 Which directory table space CANNOT be REORGed in DB2 10?
A. DSNDB01.SPT01
B. DSNDB01.SCT02
C. DSNDB01.SYSUTILX
D. DSNDB01.SYSLGRNX
Answer: C
certification IBM 000-617 certification 000-617 000-617
NO.6 Assume that you have implemented identity propagation and that the distributed user name is 'MARY'.
You have mapped this user name to the RACF user ID 'DB2USER1'. Which statement is true?
A. 'MARY' is authenticated by RACF.
B. 'DB2USER1' must be defined on the remote system.
C. Remote requests execute with the authority of 'MARY'.
D. Audit records for this transaction contains both RACF user ID 'DB2USER1' and the distributed user
'MARY'.
Answer: D
IBM certification 000-617 certification 000-617
NO.7 To satisfy a requirement to track and report on the administrative changes made by users with system
DBADM authority, which DB2 catalog table must be modified to enable this requirement.?
A. SYSIBM.SYSDBAUTH
B. SYSIBM.SYSRESAUTH
C. SYSIBM.SYSUSERAUTH
D. SYSIBM.SYSAUDITPOLICIES
Answer: D
IBM 000-617 certification 000-617 000-617
NO.8 What is NOT required for recovery of the DB2 catalog at a disaster recovery site?
A. All catalog table spaces.
B. IBM defined indexes on the catalog.
C. XML objects for the catalog table spaces.
D. LOB objects for the catalog table spaces.
Answer: C
IBM certification 000-617 000-617 000-617 certification 000-617
NO.9 What is the process to automatically start an audit policy at DB2 startup?
A. Specify DSNZPARM subsystem parameters AUDITST = *
B. Specify DSNZPARM subsystem parameter AUDITST = YES
C. Specify DSNZPARM subsystem parameter TRACSTR = YES
D. UPDATE SYSIBM.SYSAUDITPOLICIES SET DB2START=Y for the row of the audit policy to be auto
started.
Answer: D
certification IBM 000-617 certification 000-617 certification 000-617
NO.10 What process does the RESTORE SYSTEM utility NOT perform?
A. Restores logs from the log copy pool.
B. Applies logs to the data to a point in time.
C. Restores data from the database copy pool.
D. Applies only logs to the data if LOGONLY is specified.
Answer: A
IBM 000-617 000-617 examen
NO.11 You start your DB2 subsystem and check the messages in the MSTR address space. DB2 issues
message DSNJ120I indicating that it detected unequal timestamps in the BSDSs. What is the required
action to allow DB2 to start successfully?
A. DB2 restart is halted and an open reply lets you use the -RECOVER BSDS command to fix the
problem.
B. Use the VSAM REPRO utility to overwrite the older BSDS with the most recent one and issue START
DB2 again.
C. DB2 shuts down when this problem occurs. You must issue -START DB2 again and DB2 will try to
re-synchronize the BSDSs now.
D. No action is needed. DB2 automatically tries to re-synchronize and continues with the restart if the
re-synchronization was successful.
Answer: D
certification IBM 000-617 examen certification 000-617 000-617
NO.12 The DB2 command -SET SYSPARM lets you change subsystem parameters while DB2 is up.
What is the correct syntax for loading a different DSNZPARM load module?
A. -SET SYSPARM LOAD
B. -SET SYSPARM RELOAD
C. -SET SYSPARM(dsnzparm name)
D. -SET SYSPARM LOAD(dsnzparm name)
Answer: D
certification IBM 000-617 certification 000-617 000-617 000-617
NO.13 You have implemented hash access on a production table. In order to optimize hash access
performance you need to monitor the storage space utilized by hash access. How would you accomplish
this?
A. View real time statistics for the table.
B. Run RUNSTATS with the UPDATE SPACE option.
C. Issue the -DISPLAY DATABASE(*) SPACENAM(*) USE command.
D. Utilize a monitoring profile using the -DISPLAY PROFILE command.
Answer: A
certification IBM 000-617 examen 000-617 certification 000-617 certification 000-617
NO.14 When a data sharing member fails, what is the final state of the connections to the DB2 lock structure
in the coupling facility?
A. It is finally marked as FAILING.
B. It is immediately marked as FAILED PERSISTENT for the failing member.
C. It is marked as FAILING and then finally changed to FAILED PERSISTENT upon receiving
DiscFailCon from all members.
D. It is marked as FAILED PERSISTENT and then finally changed to FAILING upon receiving
DiscFailCon from all members.
Answer: C
certification IBM 000-617 examen certification 000-617 000-617 examen 000-617
NO.15 To cancel any type of thread using a -CANCEL THREAD command what information is needed?
A. The token of the thread to be canceled.
B. The luwid of the thread to be canceled.
C. The connection name of the thread to be canceled.
D. The correlation name of the thread to be canceled.
Answer: A
IBM 000-617 000-617 000-617
NO.16 Which limiting attribute CANNOT be included in the definition of a trusted context?
A. A DB2 SSID.
B. An IPv4 address.
C. An IPv6 address.
D. A secure domain name.
Answer: A
IBM examen certification 000-617 certification 000-617
NO.17 In order to separate DB2 security administration duties from DB2 system administration duties, which
step(s) must be performed?
A. Set both SECADM system parameters to an authorization ID and Role.
B. Specify YES to SEPARATE_ SECURITY and set one SYSADM system parameter to an authorization
ID or Role.
C. Specify YES to SEPARATE_ SECURITY and set one SECADM system parameter to an authorization
ID or Role.
D. Specify YES to PROTECT parameter and set one SECADM system parameter to an
authorization ID or Role.
Answer: C
IBM examen 000-617 examen certification 000-617 certification 000-617 000-617 examen 000-617
NO.18 You have just defined the profile monitoring tables and related indexes using the DSNTIJSG job in the
SDSNSAMP library. In order to monitor the number of remote threads and connections you must insert
rows into the SYSIBM.DSN_PROFILE_TABLE and SYSIBM.DSN_PROFILE_ATTRIBUTES tables to
specify the monitoring functions to be used.
What is the next step in this process?
A. Issue the -START PROFILE command.
B. Issue the -DISPLAY THREAD command.
C. Issue the -START TRACE (MONITOR) command.
D. No further steps are needed. DB2 will automatically begin monitoring those DB2 threads identified in
the monitoring profile.
Answer: A
IBM examen 000-617 examen 000-617 000-617 000-617 examen
NO.19 DB2 10 enhances the profile table monitoring facility to support the filtering and threshold monitoring for
the number of connections using which categories?
A. All local and DRDA connections.
B. Collection IDs and IP addresses.
C. Role and Authorization Identifiers.
D. Product Identifiers and Package Names.
Answer: C
IBM 000-617 000-617 examen 000-617 000-617
NO.20 What does the command -ALTER GROUPBUFFERPOOL(GBP1) RATIO(5.6) do?
A. Changes the ratio of directory entries to the local cache entries (LCE).
B. Changes the desired ratio of the number of lock entries to the number of data pages in the group buffer
pool.
C. Changes the desired ratio of the number of directory entries to the number of data pages in the group
buffer pool.
D. Changes the desired number of the data pages cast out to those that remain in the group buffer pool
when the group buffer pool checkpoint occurs.
Answer: C
IBM 000-617 examen 000-617 examen 000-617 000-617
Pour l'instant, vous pouvez télécharger le démo gratuit de Q&A IBM 000-617 dans Pass4Test pour se former avant le test IBM 000-617.
没有评论:
发表评论