Foundry Network FN0-100, de formation et d'essai

Pass4Test est un bon site qui provide la façon efficace à se former à court terme pour réussir le test Foundry Network FN0-100, c'est un certificat qui peut améliorer le niveau de vie. Les gens avec le Certificat gagent beaucoup plus que les gens sans Certificat Foundry Network FN0-100. Vous aurez une space plus grande à se développer.

Pass4Test peut vous fournir un raccourci à passer le test Foundry Network FN0-100: moins de temps et efforts dépensés. Vous trouverez les bonnes documentations de se former dans le site Pass4Test qui peut vous aider efficacement à réussir le test Foundry Network FN0-100. Si vous voyez les documentations dans les autres sites, c'est pas difficile à trouver qu''elles sont venues de Pass4Test, parce que lesquelles dans Pass4Test sont le plus complété et la mise à jour plus vite.

Pass4Test est un site d'offrir l'outil de formation convenable pour les candidats de test Certification IT. Le produit de Pass4Test peut aider les candidats à économiser les temps et les efforts. L'outil de formation est bien proche que test réel. Vous allez réussir le test 100% avec l'aide de test simulation de Pass4Test. C'est une bonne affaire à prendre le Certificat IT en coûtant un peu d'argent. N'hésitez plus d'ajouter l'outil de formation au panier.

Pass4Test peut non seulement vous aider à réussir votre rêve, mais encore vous offre le service gratuit pendand un an après vendre en ligne. Q&A offerte par l'équipe de Pass4Test vous assure à passer 100% le test de Certification Foundry Network FN0-100.

Code d'Examen: FN0-100
Nom d'Examen: Foundry Network (Foundry Networks CNE)
Questions et réponses: 82 Q&As

Le test simulation Foundry Network FN0-100 sorti par les experts de Pass4Test est bien proche du test réel. Nous sommes confiant sur notre produit qui vous permet à réussir le test Foundry Network FN0-100 à la première fois. Si vous ne passe pas le test, votre argent sera tout rendu.

FN0-100 Démo gratuit à télécharger: http://www.pass4test.fr/FN0-100.html

NO.1 Which Foundry CLI command should be used to add an unencrypted community
string?
A. snmp-server community private rw
B. snmp-server community 0 private rw
C. snmp-server community 1 private rw
D. snmp-server community clr private rw
Answer: B

Foundry Network   FN0-100   FN0-100 examen   certification FN0-100

NO.2 The show configuration command on a Foundry device will show the running
config.
A. T
B. F
Answer: B

Foundry Network   FN0-100 examen   FN0-100   FN0-100   FN0-100

NO.3 What does a Foundry ACL ID identify?
A. An ACL as standard or extended
B. Number of entries.
C. A collection of individual ACL entries
Answer: C

certification Foundry Network   FN0-100   certification FN0-100   FN0-100

NO.4 Which Foundry SLB predictor uses a percentage distribution?
A. round robin
B. weighted
C. least connections
D. delay
Answer: B

Foundry Network   FN0-100   FN0-100   FN0-100 examen   certification FN0-100

NO.5 What is the difference between TACACS+ and TACACS?
A. TACACS is an enhancement to TACACS+
B. TACACS is TCP based and TACACS+ is UDP based
C. TACACS+ provides encryption and uses TCP.
Answer: C

Foundry Network   FN0-100   FN0-100   FN0-100 examen   FN0-100

NO.6 Which STP bridge parameter manages the interval a bridge will wait for receipt of
a hello packet before initiating a topology change?
A. priority
B. forward delay
C. maximum age
D. hello time
Answer: C

Foundry Network examen   FN0-100 examen   FN0-100

NO.7 Which of the following commands will correctly configure a Foundry Layer 3
Switch to learn routes from all neighbors except 192.168.1.170?
A. BigIron(config-rip-router)# neighbor 2 deny 192.168.1.170
B. BigIron(config-rip-router)# neighbor 1024 permit any BigIron(config-rip-router)#
neighbor 2 deny 192.168.1.170
C. BigIron(config-rip-router)# neighbor deny 192.168.1.170 BigIron(config-rip-router)#
neighbor 1024 permit any
D. BigIron(config-rip-router)# neighbor 2 deny 192.168.1.170
BigIron(config-rip-router)# neighbor 1024 permit any
Answer: D

certification Foundry Network   certification FN0-100   FN0-100   FN0-100 examen

NO.8 Exhibit:
The diagram shows an OSPF network with no designated router (DR) and no
backup designated router (BDR). Which of the following statements identifiy which
routers will be selected DR and BDR?
A. Router C is DR, Router B is BDR
B. Router B is DR, Router A is BDR
C. Router B is BDR, Router A is DR
D. Router A is DR, Router C is BDR
Answer: B

Foundry Network examen   FN0-100 examen   FN0-100 examen

NO.9 Foundry trunking groups on L3 routers load share based on destination IP/IPX
address.
A. T
B. F
Answer: A

Foundry Network examen   FN0-100 examen   FN0-100   FN0-100 examen   FN0-100

NO.10 Which broadcast and pruning multicast protocol delivers IP multicast data to its
intended receivers? (Select all that apply)
A. PIM
B. ICMP
C. DVMRP
D. IGMP
Answer: A, C

Foundry Network   FN0-100 examen   FN0-100 examen   FN0-100 examen

NO.11 What transport layer protocol provides a connection oriented service?
A. UDP
B. STP
C. TCP
D. ARP
Answer: C

Foundry Network   certification FN0-100   FN0-100   certification FN0-100   certification FN0-100   certification FN0-100

NO.12 What is the maximum hop count allowed by RIP?
A. 15
B. 10
C. 255
D. no limit
Answer: A

Foundry Network examen   FN0-100   FN0-100 examen   FN0-100 examen

NO.13 Which routing protocol is used on the Internet to route traffic between Autonomous
Systems and to maintain loop-free routing?
A. OSPF
B. IBGP
C. BGP4
D. RIP
Answer: C

certification Foundry Network   FN0-100   certification FN0-100   FN0-100   FN0-100 examen

NO.14 Which of the following are true regarding the highest priority queue on Foundry
chassis devices?
A. qosp0 ?This queue corresponds to 802.1p prioritization levels 0 and 1 and Foundry
priority levels 0 and 1.
B. qosp0 ?This queue corresponds to 802.1p prioritization levels 6 and 7 and Foundry
priority levels 6 and 7.
C. qosp3 ?This queue corresponds to 802.1p prioritization levels 0 and 1 and Foundry
priority levels 0 and 1.
D. qosp3 ?This queue corresponds to 802.1p prioritization levels 6 and 7 and Foundry
priority levels 6 and 7.
Answer: D

Foundry Network   FN0-100 examen   FN0-100   FN0-100   FN0-100 examen

NO.15 The appletalk echo protocol (AEP) is equivalent to which IP protocol?
A. UDP
B. TCP
C. ARP
D. ICMP
Answer: D

Foundry Network   FN0-100   certification FN0-100

NO.16 Foundry route health injection feature supports health checks for which of the
following?
A. All TCP traffic
B. All TCP and UDP traffic
C. HTTP only
D. HTTP, POP3, and SNMP
Answer: C

Foundry Network   FN0-100   certification FN0-100   FN0-100

NO.17 Which Foundry CLI command is used to copy the system image from the secondary
flash area to the primary?
A. copy flash primary
B. copy slot1 primary
C. copy secondary primary
D. copy flash flash primary
Answer: D

certification Foundry Network   certification FN0-100   FN0-100

NO.18 An OSPF interface configured to be passive will perform which of the following?
A. send and receive OSPF updates
B. receive but not forward OSPF updates
C. will not send or receive OSPF updates
D. will not receive but forward OSPF updates
Answer: C

certification Foundry Network   certification FN0-100   FN0-100   FN0-100 examen

NO.19 What feature allows a switch to detect and switch web traffic to a local cache server
within the network?
A. http header hashing
B. SSL session ID switching
C. transparent cache switching
D. cache route optimization
Answer: C

Foundry Network   FN0-100 examen   FN0-100 examen   certification FN0-100   FN0-100 examen

NO.20 Which Foundry CLI command is used to provide privileged user mode?
A. access
B. enable
C. super-user
D. config t
Answer: B

Foundry Network   FN0-100   FN0-100 examen

Pass4Test vous permet à réussir le test Certification sans beaucoup d'argents et de temps dépensés. La Q&A Foundry Network FN0-100 est recherchée par Pass4Test selon les résumés de test réel auparavant, laquelle est bien liée avec le test réel.