Le Certificat EMC E20-547 est un passport rêvé par beaucoup de professionnels IT. Le test EMC E20-547 est une bonne examination pour les connaissances et techniques professionnelles. Il demande beaucoup de travaux et efforts pour passer le test EMC E20-547. Pass4Test est le site qui peut vous aider à économiser le temps et l'effort pour réussir le test EMC E20-547 avec plus de possibilités. Si vous êtes intéressé par Pass4Test, vous pouvez télécharger la partie gratuite de Q&A EMC E20-547 pour prendre un essai.
Il y a nombreux façons à vous aider à réussir le test EMC E20-547. Le bon choix est l'assurance du succès. Pass4Test peut vous offrir le bon outil de formation, lequel est une documentation de qualité. La Q&A de test EMC E20-547 est recherchée par les experts selon le résumé du test réel. Donc l'outil de formation est de qualité et aussi autorisé, votre succès du test EMC E20-547 peut bien assuré. Nous allons mettre le jour successivement juste pour répondre les demandes de tous candidats.
Si vous traviallez dur encore pour préparer le test de EMC E20-547 et réaliser votre but plus vite, Pass4Test peut vous donner une solution plus pratique. Choisir la Q&As de Pass4Test qui vous assure que c'est pas un rêve à réussir le test EMC E20-547.
Le test simulation EMC E20-547 sorti par les experts de Pass4Test est bien proche du test réel. Nous sommes confiant sur notre produit qui vous permet à réussir le test EMC E20-547 à la première fois. Si vous ne passe pas le test, votre argent sera tout rendu.
Code d'Examen: E20-547
Nom d'Examen: EMC (VNX Solutions Specialist Exam for Storage Administrators )
Questions et réponses: 203 Q&As
C'est sûr que le Certificat EMC E20-547 puisse améliorer le lendemain de votre carrière. Parce que si vous pouvez passer le test EMC E20-547, c'est une meilleure preuve de vos connaissances professionnelles et de votre bonne capacité à être qualifié d'un bon boulot. Le Certificat EMC E20-547 peut bien tester la professionnalité de IT.
E20-547 Démo gratuit à télécharger: http://www.pass4test.fr/E20-547.html
NO.1 At which RAID level are FAST Cache drives configured for VNX arrays?
A. RAID 0
B. RAID 1
C. RAID 3
D. RAID 5
Answer: B
EMC E20-547 E20-547 examen E20-547 E20-547
NO.2 What does the acronym "CHAP" refer to?
A. Challenge Handshake Authentication Protocol
B. Challenge Handshake Authorization Protocol
C. CLARiiON Handshake Authentication
D. Consistent Host Application Protocol
Answer: A
EMC E20-547 examen E20-547 certification E20-547 E20-547
NO.3 Which failover mode must be configured to use vStorage APIs for Array Integration (VAAI)
functionality?
A. 0
B. 1
C. 2
D. 4
Answer: D
certification EMC E20-547 examen E20-547 E20-547 examen
NO.4 Which Unisphere storage role will limit a user to the administration of the file system checkpoints, LUN
mirrors, and replication manager tasks?
A. Data recovery
B. Administration
C. Data protection
D. NAS administrator
Answer: C
EMC examen E20-547 examen certification E20-547 certification E20-547 certification E20-547
NO.5 Which Linux kernel supports dynamic LUN scanning?
A. 2.3
B. 2.4
C. 2.5
D. 2.6
Answer: D
EMC examen E20-547 E20-547
NO.6 How many storage groups can a host belong to in an array?
A. 1
B. 2
C. 4
D. 6
Answer: A
EMC E20-547 examen certification E20-547
NO.7 Which Unisphere wizard can automatically allocate all available disk storage and present it as private
LUNs?
A. Backend Bus Reset Wizard
B. File System Wizard
C. Disk Provisioning Wizard for File
D. Celera Setup Wizard
Answer: C
EMC examen E20-547 certification E20-547
NO.8 What happens when a reverse synchronization completes without Protected Restore Mode enabled?
A. Only the reverse-synchronized clone remains unfractured
B. Host writes to the source LUN are not mirrored to clone
C. The gold copy clone used for restore will remain as is
D. All clones will be fractured
Answer: B
certification EMC E20-547 E20-547
NO.9 If a source LUN is trespassed, what happens to a fractured cloned LUN?
A. The peer SP acquires the feature logs
B. The peer SP acquires the clone LUN
C. The peer SP acquires both the clone LUN and the feature logs
D. Neither the clone LUN nor the feature logs will be acquired by the peer SP
Answer: C
EMC E20-547 certification E20-547 E20-547 E20-547 examen E20-547
NO.10 What is the preferred method for partitioning VNX FC LUNs attached to a Windows Server 2008 R2
host?
A. Disk Management
B. fdisk
C. format
D. vtoc
Answer: A
certification EMC E20-547 E20-547
NO.11 Which RecoverPoint configuration details can be presented in report format when using Data Protection
Advisor.?
A. RPA configuration changes
B. Replication sets
C. Replication lag
D. Link state change
Answer: C
EMC examen E20-547 E20-547 examen
NO.12 What happens when a new CFS share is created using Unisphere and all available CIFS server check
boxes remain unchecked?
A. The VNX system prompts for selection of at least one CFS server
B. A global share Is created and served by the primary VDM
C. A global share is created and served by all CIFS servers residing on the Data Mover
D. None of the CIFS servers residing on the Data Mover serve the newly created share
Answer: D
EMC E20-547 E20-547 E20-547
NO.13 An administrator tries to modify the quota settings on a CIFS share from a windows server 2003 host,
but the quota tab does not exist in the network drive properties. What could be a possible cause?
A. Exporting is implemented at the file system subdirectory level on VNX OE for File.
B. The user does not have administrator privileges on this share.
C. Quotas can be managed only with Windows Server 2008.
D. Windows users cannot modify the quota settings.
Answer: A
EMC E20-547 E20-547 E20-547 examen E20-547
NO.14 A file system has auto_extend enabled. If the file system size is greater than the extend_size value.
What will happen when the file system reaches its HWM?
A. The file system will not be extended
B. The extend size value cannot by less than the die system size
C. The file system is extended by the extend_size value
D. The file system is extended by five percent of its size
Answer: D
EMC E20-547 E20-547 examen E20-547
NO.15 What is the CLI command to enable Access Logix?
A. naviseccli -h <SP_name> storagegroup -enable
B. naviseccli -h <SP_name> accesslogix -enable
C. naviseccli -h <SP_name> storagegroup -on
D. naviseccli -h <SP_name> accesslogix -on
Answer: B
EMC examen E20-547 E20-547
NO.16 After presenting a LUN to a Linux host, which utility is used to configure a partition?
A. fdisk
B. Unisphere Server Utility
C. Unisphere Service Manager
D. Disk Management
Answer: A
certification EMC E20-547 certification E20-547 E20-547 E20-547
NO.17 In a VNX series array, how does FAST manage data in a heterogeneous storage pool?
A. It relocates LUNs from one tier to another to improve performance.
B. It relocates more active data to faster drives and less active data to slower drives.
C. It relocates more active data from tier 1storage without users noticing the difference.
D. It acts as an application accelerator and relocates LUNs based on performance.
Answer: B
certification EMC E20-547 certification E20-547
NO.18 When performing switch maintenance, a customer accidentally disconnects all network connections to
an active VNX Data Mover
How does VNX handle this situation?
A. The primary Data Mover remains active
B. The VNX always notifies EMC Customer Service of the problem
C. The active Data Mover immediately fails over
D. The active Data Mover fails over after 30 seconds of lost connectivity
Answer: A
EMC examen E20-547 E20-547 E20-547 examen E20-547 E20-547
NO.19 Which criterion must be met before executing the storage pool -destroy command with Navisphere
secure CLI.
A. Complete removal of all LUNs from the pool
B. Complete removal of unused LUNs from the pool
C. Complete removal of large LUNs from the pool
D. Complete removal of empty LUNs from the pool
Answer: A
EMC E20-547 certification E20-547 certification E20-547
NO.20 What will prevent a storage administrator from deleting a storage group?
A. The presence of LUNs in the storage group
B. The presence of MirrorView target LUNs in the storage group
C. The presence of MirrorView source LUNs in the storage group
D. The presence of hosts in the storage group
Answer: D
EMC E20-547 examen E20-547 E20-547 certification E20-547 E20-547
Pass4Test est un site web qui vous donne plus de chances à passer le test de Certification EMC E20-547. Le résultat de recherche sortis par les experts de Pass4Test peut assurer que ce sera vous ensuite qui réussirez le test EMC E20-547. Choisissez Pass4Test, choisissez le succès. L'outil de se former de Pass4Test est bien efficace. Parmi les gens qui ont déjà passé le test, la majorité a préparé le test avec la Q&A de Pass4Test.
没有评论:
发表评论