Pass4Test est un site d'offrir l'outil de formation convenable pour les candidats de test Certification IT. Le produit de Pass4Test peut aider les candidats à économiser les temps et les efforts. L'outil de formation est bien proche que test réel. Vous allez réussir le test 100% avec l'aide de test simulation de Pass4Test. C'est une bonne affaire à prendre le Certificat IT en coûtant un peu d'argent. N'hésitez plus d'ajouter l'outil de formation au panier.
Si vous faites toujours la lutte contre le test Microsoft 070-417, Pass4Test peut vous aider à résoudre ces difficultés avec ses Q&As de qualité, et atteindre le but que vous avez envie de devenir un membre de Microsoft 070-417. Si vous avez déjà décidé à s'améliorer via Microsoft 070-417, vous n'avez pas aucune raison à refuser Pass4Test. Pass4Test peut vous aider à passer le test à la première fois.
Le test Microsoft 070-417 est le premier pas pour promouvoir dans l'Industrie IT, mais aussi la seule rue ramenée au pic de succès. Le test Microsoft 070-417 joue un rôle très important dans cette industrie. Et aussi, Pass4Test est un chaînon inevitable pour réussir le test sans aucune doute.
Avec l'aide du Pass4Test, vous allez passer le test de Certification Microsoft 070-417 plus facilement. Tout d'abord, vous pouvez choisir un outil de traîner de Microsoft 070-417, et télécharger les Q&A. Bien que il y en a beaucoup de Q&A pour les tests de Certification IT, les nôtres peuvent vous donner non seulement plus de chances à s'exercer avant le test réel, mais encore vous feront plus confiant à réussir le test. La haute précision des réponses, la grande couverture des documentations, la mise à jour constamment vous assurent à réussir votre test. Vous dépensez moins de temps à préparer le test, mais vous allez obtenir votre certificat plus tôt.
La grande couverture, la bonne qualité et la haute précision permettent le Pass4Test à avancer les autre sites web. Donc le Pass4Test est le meilleur choix et aussi l'assurance pour le succès de test Microsoft 070-417.
Code d'Examen: 070-417
Nom d'Examen: Microsoft (Upgrading Your Skills to MCSAWindows Server 2012)
Questions et réponses: 137 Q&As
070-417 Démo gratuit à télécharger: http://www.pass4test.fr/070-417.html
NO.1 Your network contains an Active Directory domain named contoso.com. The domain contains
two
domain controllers.
The domain controllers are configured as shown in the following table.
In the perimeter network, you install a new server named Server1 that runs Windows Server 2012.
Server1 is in a workgroup. You need to perform an offline domain join of Server1 to the
contoso.com
domain.
What should you do first?
A. Run the djoin.exe command.
B. Run the dsadd.exe command.
C. Transfer the PDC emulator role to DC1.
D. Transfer the infrastructure master role to DC1.
Answer: A
Microsoft examen 070-417 examen 070-417 070-417
NO.2 Your network contains an Active Directory domain named contoso.com. The domain contains
a server
named Server1 that runs Windows Server 2012. On a server named Server2, you perform a Server
Core
Installation of Windows Server 2012. You join Server2 to the contoso.com domain. You need to
ensure
that you can manage Server2 by using the Computer Management console on Server1.
What should you do on Server2.?
A. Run the Disable-NetFirewallRulecmdlet.
B. Run the Enable-NetFirewallRulecmdlet.
C. Run sconfig.exeand configure the network settings.
D. Run sconfig.exeand configure remote management.
Answer: B
Microsoft examen 070-417 070-417 070-417 examen
NO.3 You have a file server named Server1 that runs Windows Server 2012. Server1 has following
hardware
configurations: ¡è 16 GB of RA ¡è A single qu-core CP ¡è Three network teams that have two
network
adapters each You add additional CPUs and RAM t Server1. You repurpose Server1 as a
virtualization
host. You install the Hyper-V server role on Server1. You need to create four external virtual
switches in
Hyper-V.
Which cmdlet should you run first?
A. Add-VMNetworkAdapter
B. Add-NetLbfoTeamNic
C. Set-NetAdapter
D. Remove- NetLbfoTeam
Answer: D
Microsoft examen certification 070-417 070-417 examen certification 070-417 certification 070-417
NO.4 You have a server named Server1 that runs Windows Server 2012. Server1 has the Hyper-V
server role
installed.
Server1 is connected to two Fibre Channel SANs and is configured as shown in the following table.
You have a virtual machine named VM1. You need to configure VM1 to connect to SAN1.
What should you do first?
A. Create a virtual Fibre Channel SAN.
B. Configure network adapter teaming.
C. Add one HBA.
D. Create a Hyper-V virtual switch.
Answer: A
Microsoft 070-417 070-417 070-417
NO.5 Your network contains an Active Directory domain named contoso.com. All domain controllers
run
Windows Server 2008 R2. One of the domain controllers is named DC1. The network contains a
member
server named Server1 that runs Windows Server 2012. You need to promote Server1 to a domain
controller by using install from media (IFM).
What should you do first?
A. Create a system state backup of DC1.
B. Run the Active Directory Domain Services Installation Wizard on DC1.
C. Run the Active Directory Domain Services Configuration Wizard on Server1.
D. Create IFM media on DC1.
E. Upgrade DC1 to Windows Server 2012.
Answer: E
Microsoft examen certification 070-417 certification 070-417 070-417 certification 070-417
NO.6 You have a server named Server 1 that runs Windows Server 2012. Server1 has five network
adapters.
Three of the network adapters are connected to a network named LAN1. The two other network
adapters
are connected to a network named LAN2. You create a network adapter team named Team1 from
two of
the adapters connected to LAN1. You create a network adapter team named Team2 from the two
adapters connected to LAN2. A company policy states that all server IP addresses must be assigned
by
using a reserved address in DHCP. You need to identify how many DHCP reservations you must
create
for Server1.
How many reservations should you identify?
A. 2
B. 3
C. 5
D. 7
Answer: B
Microsoft 070-417 070-417 examen
NO.7 Your network contains an Active Directory domain named contoso.com. The domain contains
two
domain controllers named DC1 and DC2. You install Windows Server 2012 on a new computer
named
DC3. You need to manually configure DC3 as a domain controller.
Which tool should you use?
A. winrm.exe
B. Server Manager
C. dcpromo.exe
D. Active Directory Domains and Trusts
Answer: B
Microsoft certification 070-417 070-417 070-417
NO.8 Your network contains an Active Directory domain named contoso.com. The domain contains
two
member servers named Server1 and Server2 that run Windows Server 2012. You log on to Server1.
You
need to retrieve the IP configurations of Server2.
Which command should you run from Server1?
A. dsquery * -scope base -attr ip,server2
B. winrs -r:server2 ipconfig
C. winrm get server2
D. ipconfig > server2.ip
Answer: B
Microsoft 070-417 certification 070-417 070-417 examen 070-417 070-417
NO.9 Your network contains an Active Directory domain named contoso.com. All servers run either
Windows
Server 2008 R2 or Windows Server 2012. All client computers run either Windows 7 or Windows 8.
The
domain contains a member server named Server1 that runs Windows Server 2012. Server1 has the
File
and Storage Services server role installed. On Server1, you create a share named Share1. You need
to
ensure that users can use Previous Versions to restore the files in Share1.
What should you configure on Server1?
A. A data recovery agent
B. The Shadow Copies settings
C. The Recycle Bin properties
D. A Windows Server Backup schedule
Answer: B
Microsoft 070-417 examen 070-417 070-417 070-417 070-417 examen
NO.10 Your network contains an Active Directory domain named contoso.com. The network
contains a server
named Server1 that runs Windows Server 2012 and a server named Server2 that runs Windows
Server
2008 R2 Service Pack 1 (SP1). Server1 and Server2 are member servers. You need to ensure that you
can manage Server2 from Server1 by using Server Manager.
Which two tasks should you perform? (Each correct answer presents part of the solution. Choose
two.)
A. Install Windows Management Framework 3.0 on Server2.
B. Install Remote Server Administration Tools on Server1.
C. Install the Windows PowerShell 2.0 engine on Server1.
D. Install Microsoft .NET Framework 4 on Server2.
E. Install Remote Server Administration Tools on Server2.
Answer: AD
Microsoft certification 070-417 070-417
Choisir le produit fait avec tous efforts des experts de Pass4Test vous permet à réussir 100% le test Certification IT. Le produit de Pass4Test est bien certifié par les spécialistes dans l'Industrie IT. La haute qualité du produit Pass4Test ne vous demande que 20 heures pour préparer, et vous allez réussir le test Microsoft 070-417 à la première fois. Vous ne refuserez jamais pour le choix de Pass4Test, parce qu'il symbole le succès.
没有评论:
发表评论