Le Pass4Past possède une équipe d'élite qui peut vous offrir à temps les matériaux de test Certification CompTIA PD1-001. En même temps, nos experts font l'accent à mettre rapidement à jour les Questions de test Certification IT. L'important est que Pass4Test a une très bonne réputation dans l'industrie IT. Bien que l'on n'ait pas beaucoup de chances à réussir le test de PD1-001, Pass4Test vous assure à passer ce test par une fois grâce à nos documentations avec une bonne précision et une grande couverture.
Pass4Test est un site à offrir particulièrement la Q&A CompTIA PD1-001, vous pouvez non seulement aprrendre plus de connaissances professionnelles, et encore obtenir le Passport de Certification CompTIA PD1-001, et trouver un meilleur travail plus tard. Les documentations offertes par Pass4Test sont tout étudiés par les experts de Pass4Test en profitant leurs connaissances et expériences, ces Q&As sont impresionnées par une bonne qualité. Il ne faut que choisir Pass4Test, vous pouvez non seulement passer le test CompTIA PD1-001 et même se renforcer vos connaissances professionnelles IT.
Code d'Examen: PD1-001
Nom d'Examen: CompTIA (CompTIA PDI+ Beta Exam)
Questions et réponses: 861 Q&As
Les produits de Pass4Test a une bonne qualité, et la fréquence de la mise à jour est bien impressionnée. Si vous avez déjà choisi la Q&A de Pass4Test, vous n'aurez pas le problème à réussir le test CompTIA PD1-001.
Pas besoin de beaucoup d'argent et de temps, vous pouvez passer le test CompTIA PD1-001 juste avec la Q&A de CompTIA PD1-001 offerte par Pass4Test qui vous offre le test simulation bien proche de test réel.
PD1-001 Démo gratuit à télécharger: http://www.pass4test.fr/PD1-001.html
NO.1 During the photoconductor preparation step, residual charge can be removed by which of the
following? (Select TWO).
A.Pressure
B.Oil
C.Light
D.Gravity
E.Electrical Charge
Answer: CE
certification CompTIA PD1-001 PD1-001 examen PD1-001 examen
NO.2 A technician is troubleshooting a network connectivity issue on a MFD and would like to eliminate the
possibility of another device on the network having the same IP address. The technician should:
A.disconnect the MFD and ping the IP address.
B.disconnect the MFD and ping the subnet mask.
C.disconnect the MFD and ping the loopback address.
D.run the ipconfig command from the command prompt.
Answer: A
certification CompTIA PD1-001 examen PD1-001 PD1-001 examen
NO.3 A polygon mirror is part of which of the following assemblies?
A.Laser unit
B.Developer unit
C.Charge assembly
D.Fuser assembly
Answer: A
CompTIA PD1-001 PD1-001 PD1-001 PD1-001
NO.4 Which of the following would be the BEST process for the technician to follow when beginning to
diagnose a unit at a customers site?
A.Check the printers error log, and then inform the primary user what the issue is.
B.Go directly to the printer and investigate any issues that are found.
C.Investigate the printers status, then ask the primary user to write down what they think is wrong.
D.Gather information from the primary user, and then evaluate the printers condition.
Answer: D
CompTIA examen PD1-001 PD1-001 examen PD1-001 PD1-001 examen
NO.5 A customer has installed a new computer on their network. They can print to the printer but the option
for duplex printing is not available. All other computers have the option. Which of the following is the
cause of the problem?
A.The new computer is printing to the wrong IP address.
B.The new computer is using the wrong protocol.
C.The driver port is not setup correctly.
D.The option has not been selected on the driver.
Answer: D
CompTIA PD1-001 certification PD1-001
NO.6 Which of the following utilities could be used to determine a subnet mask?
A.PING
B.NSLOOKUP
C.TRACERT
D.IPCONFIG
Answer: D
CompTIA PD1-001 examen PD1-001 examen certification PD1-001 certification PD1-001
NO.7 An encoder sensor typically detects:
A.paper position.
B.shaft rotation.
C.magnetic flux.
D.laser beam strength.
Answer: B
CompTIA PD1-001 examen PD1-001 PD1-001 PD1-001
NO.8 In which of the following sections of an MFP would a technician find a Xenon Lamp?
A.The paper feed section
B.The fuser section
C.The scanner section
D.The transfer section
Answer: C
CompTIA PD1-001 PD1-001 certification PD1-001
NO.9 Which of the following is the purpose of a torque limiter in a roller?
A.To reduce wear and tear on rollers.
B.To provide resistance but still allow some slippage.
C.To limit the amount of movement by media.
D.To make it easier to replace rollers.
Answer: B
CompTIA examen certification PD1-001 PD1-001 examen
NO.10 Which of the following is a reason black toner is used in color printers?
A.It decreases the print speed in color laser printers.
B.It prevents moir patterns when printing color photographs.
C.It reduces the cost per page when printing gray scale documents.
D.It makes the color toner resistant to smudging when wet.
Answer: C
CompTIA examen PD1-001 PD1-001 certification PD1-001
NO.11 Which of the following components is part of the ink dispersion system?
A.Print Heads
B.Cleaning heads
C.Pickup Roller
D.Charge Assembly
Answer: A
CompTIA PD1-001 PD1-001 PD1-001 examen PD1-001 examen
NO.12 A customer is concerned about excessive media jamming in their device. Which of the following is the
FIRST thing a technician should check?
A.Media feed rollers
B.Cassette drawers
C.Fusing section
D.Device log data
Answer: D
certification CompTIA certification PD1-001 PD1-001 examen
NO.13 Which of the following functions is associated with the developer unit?
A.Supplies toner to the photoconductor
B.Charges the surface of the photoconductor
C.Writes the latent image on the photoconductor
D.Cleans the photoconductor
Answer: A
CompTIA PD1-001 certification PD1-001 PD1-001
NO.14 When is it advisable to dump the waste toner from a technicians service vacuum?
A.When it is full.
B.It is not recommended.
C.Before performing preventative maintenance.
D.After each call.
Answer: B
certification CompTIA PD1-001 PD1-001 examen PD1-001 certification PD1-001 PD1-001
NO.15 The polygon mirror is located in which of the following components?
A.Developer unit
B.Scanner unit
C.Fuser unit
D.Laser unit
Answer: D
certification CompTIA certification PD1-001 PD1-001 examen PD1-001 PD1-001 examen PD1-001
NO.16 The customer has a dedicated ink jet fax machine that is used to send and receive faxes only from the
corporate office. The user complains of streaks on the received faxes while the internal self-prints are fine.
Which of the following should a technician recommend?
A.Clean the scanner glass on the distant machine.
B.Clean the scanner glass on the local machine.
C.Clean the printer head on the local machine.
D.Call the telephone company to increase the line signal level.
Answer: A
certification CompTIA certification PD1-001 PD1-001 examen PD1-001 certification PD1-001 PD1-001
NO.17 Using the CMYK color model, the color purple is produced by combining cyan and which other color?
A.Green
B.Magenta
C.Yellow
D.Black
Answer: B
CompTIA examen PD1-001 PD1-001
NO.18 How many CCDs are located in a single pass duplex ADF?
A.One
B.2
C.3
D.4
Answer: B
CompTIA examen PD1-001 PD1-001 certification PD1-001
NO.19 The proper safety guidelines for handling any device specific consumables can be found in which of
the following documentation?
A.Material Safety Data Sheets
B.Installation Guides
C.Consumer Reports
D.Devices Parts Catalog
Answer: A
certification CompTIA certification PD1-001 certification PD1-001 PD1-001 examen PD1-001 examen PD1-001
NO.20 Which of the following stages in the laser print process attracts toner to the latent image on the
photoconductor?
A.Writing
B.Fusing
C.Development
D.Transfer
Answer: C
certification CompTIA PD1-001 examen certification PD1-001 PD1-001
Le succès n'est pas loin de vous si vous choisissez Pass4Test. Vous allez obtenir le Certificat de CompTIA PD1-001 très tôt. Pass4Test peut vous permettre à réussir 100% le test CompTIA PD1-001, de plus, un an de service en ligne après vendre est aussi gratuit pour vous.
没有评论:
发表评论