Vous pouvez comparer un peu les Q&As dans les autres sites web que lesquelles de Pass4Test, c'est pas difficile à trouver que la Q&A Network Appliance NS0-153 est plus complète. Vous pouvez télécharger le démo gratuit à prendre un essai de la qualité de Pass4Test. La raison de la grande couverture des questions et la haute qualité des réponses vient de l'expérience riche et la connaissances professionnelles des experts de Pass4Test. La nouvelle Q&A de Network Appliance NS0-153 lancée par l'équipe de Pass4Test sont bien populaire par les candidats.
Être un travailleur IT, est-ce que vous vous souciez encore pour passer le test Certificat IT? Le test examiner les techniques et connaissances professionnelles, donc c'est pas facile à réussir. Pour les candidats qui participent le test à la première fois, une bonne formation est très importante. Pass4Test offre les outils de formation particulier au test et bien proche de test réel, n'hésitez plus d'ajouter la Q&A au panier.
Bien qu'Il y ait plein de talentueux dans cette société, il manque beaucoup de professionnels dans les domaine en cours de développement, l'Industrie IT est l'un de ces domaines. Donc le test Network Appliance NS0-153 est un bon l'examination de technique informatique. Pass4Test est un site d'offrir la formation particulière au test Network Appliance NS0-153.
Il demande les connaissances professionnelles pour passer le test Network Appliance NS0-153. Si vous manquez encore ces connaissances, vous avez besoin de Pass4Test comme une resourece de ces connaissances essentielles pour le test. Pass4Test et ses experts peuvent vous aider à renfocer ces connaissances et vous offrir les Q&As. Pass4Test fais tous efforts à vous aider à se renforcer les connaissances professionnelles et à passer le test. Choisir le Pass4Test peut non seulement à obtenir le Certificat Network Appliance NS0-153, et aussi vous offrir le service de la mise à jour gratuite pendant un an. Si malheureusement, vous ratez le test, votre argent sera 100% rendu.
Les spécialistes d'expérience de Pass4Test ont fait une formation ciblée au test Network Appliance NS0-153. Cet outil de formation est convenable pour les candidats de test Network Appliance NS0-153. Pass4Test n'offre que les produits de qualité. Vous aurez une meilleure préparation à passer le test avec l'aide de Pass4Test.
Code d'Examen: NS0-153
Nom d'Examen: Network Appliance (Network Appliance Storege Networking)
Questions et réponses: 184 Q&As
Aujourd'hui, c'est une société pleine de gens talentueux, la meilleure façon de suivre et assurer la place dans votre carrière est de s'améliorer sans arrêt. Si vous n'augmentez pas dans votre carrière, vous êtes juste sous-développé parce que les autres sont meilleurs que vous. Pour éviter ce cas, vous devez vous former successivement.
NS0-153 Démo gratuit à télécharger: http://www.pass4test.fr/NS0-153.html
NO.1 What is the definition of the cifs setup command?
A.It displays the mount point of all shared directories.
B.It displays the names of all mounted directories on the storage system.
C.It displays the prompts for CIFS configuration information.
D.It displays a list of the users on the storage system.
Correct:C
certification Network Appliance certification NS0-153 NS0-153 examen NS0-153
NO.2 Which command would you use to verify that the iSCSI service is running?
A.license add iSCSI
B.iscsi service
C.iscsi status
D.iscsi protocol
Correct:C
certification Network Appliance certification NS0-153 NS0-153 examen NS0-153
NO.3 To export volumes and directories automatically on reboot, include them in the /etc/exports file.
A.True
B.False
Correct:A
certification Network Appliance certification NS0-153 NS0-153 examen NS0-153
NO.4 ____________ is the default cfmode for new installations of Data ONTAP 7.2.
A.single image
B.mixed
C.partner
D.dual fabric
Correct:A
certification Network Appliance certification NS0-153 NS0-153 examen NS0-153
NO.5 The writeable snapshot that is created for a LUN clone depends on ___________.
A.mirroring.
B.the snapshot taken at the time the clone was created.
C.exclusive access to the volume.
D.the data in the original LUN not changing.
Correct:B
certification Network Appliance certification NS0-153 NS0-153 examen NS0-153
NO.6 Which security method encrypts the data?
A.IPSec
B.CHAP
C.LUN masking
D.Header and Data Digests
Correct:A
certification Network Appliance certification NS0-153 NS0-153 examen NS0-153
NO.7 To configure a storage system as a member of an active directory, the time on the storage
system must be synchronized with the time on the Domain Controller.
A.True
B.False
Correct:A
certification Network Appliance certification NS0-153 NS0-153 examen NS0-153
NO.8 If the client is a CIFS client, locks are __________.
A.advisory
B.mandatory
C.ordered
D.optional
Correct:B
certification Network Appliance certification NS0-153 NS0-153 examen NS0-153
NO.9 Applications, such as databases, running on NAS or iSCSI or FC SAN must be
__________________.
A.prepared for snapshots by flushing buffers to disk and momentarily suspending activity.
B.disconnected from their storage resources during the snapshot.
C.using dynamic multipathing during a backup.
D.mirrored with a host-based volume manager to be backed-up.
Correct:A
certification Network Appliance certification NS0-153 NS0-153 examen NS0-153
NO.10 UNIX allow file access based on __________.
A.GID or UID and UNIX permissions.
B.NT ACLs and UNIX permissions.
C.NT ACLs and SID.
D.GID or UID and ACLs.
Correct:A
certification Network Appliance certification NS0-153 NS0-153 examen NS0-153
NO.11 Using the output below, a co-worker determined that these are type "Solaris" LUNs. What would
your determination be? lun show -m LUN pathMapped to LUN ID
--------------------------------------------------- /vol/vol1/lun0 solaris-igroup0 0 /vol/vol1/lun1 solaris-igroup1
0 /vol/vol1/qtree1/lun2 solaris-igroup2 0 /vol/vol1/qtree1/lun3 solaris-igroup3 0
A.These are type "Solaris" LUNs.
B.These are NFS LUNs, but the exact OS cannot be determined.
C.Not enough information is given here. Run the lun show -v command to get the information requested.
D.Not enough information is given here. Run the lun map command to get the information requested.
Correct:C
certification Network Appliance certification NS0-153 NS0-153 examen NS0-153
NO.12 If you believe you have a FC SAN performance problem, which NetApp utility or command
would gather both your Solaris host and storage appliance data for analysis?
A.poststat
B.perfstat
C.prestat
D.sio_ntap.exe
Correct:B
certification Network Appliance certification NS0-153 NS0-153 examen NS0-153
NO.13 Which command is the most appropriate for troubleshooting a multiprotocol authentication
problem?
A.wcc
B.rdfile /etc/rc
C.priv set advanced
D.sysstat 1
Correct:A
certification Network Appliance certification NS0-153 NS0-153 examen NS0-153
NO.14 Which three are used for creating LUNs on the storage appliance? (Choose 3)
A.lun create
B.lun setup
C.FilerView
D.lun config
Correct:A B C
certification Network Appliance certification NS0-153 NS0-153 examen NS0-153
NO.15 A quota target can be defined as _______________.
A.the maximum amount of disk space in a volume.
B.the maximum number of files in a disk.
C.a user, group, or qtree to which a quota is applied.
D.a specific disk space threshold.
Correct:C
certification Network Appliance certification NS0-153 NS0-153 examen NS0-153
NO.16 Three methods of creating a LUN are: *lun setup *lun map *FilerView
A.True
B.False
Correct:A
certification Network Appliance certification NS0-153 NS0-153 examen NS0-153
NO.17 To view per client NFS statistics on the storage appliance, options nfs.per_client_stats.enable
must be turned on.
A.True
B.False
Correct:A
certification Network Appliance certification NS0-153 NS0-153 examen NS0-153
NO.18 If you change the setting for the option cifs.neg_buf_size, you need to terminate CIFS on the
storage appliance and do a restart for the changes to take effect.
A.True
B.False
Correct:A
certification Network Appliance certification NS0-153 NS0-153 examen NS0-153
NO.19 Which one of the following will enable "symlink_strict_security"?
A.options cifs.symlink_strict_security on
B.cifs shares -change -symlink_strict_security
C.options symlink_strict_security=true
D.options symlink_strict_security=on
Correct:B
certification Network Appliance certification NS0-153 NS0-153 examen NS0-153
NO.20 What is the outcome of this command? lun create -b /vol/vol2/.snapshot/testsnap/lun0
/vol/vol2/lun0.clone
A.It creates a duplicate of the clone process of lun0.
B.It creates a clone of the writeable snapshot of lun0.
C.It creates a writeable snapshot of lun0.
D.It creates a snapshot "testsnap" of vol2.
Correct:C
certification Network Appliance certification NS0-153 NS0-153 examen NS0-153
Selon les anciens test Network Appliance NS0-153, la Q&A offerte par Pass4Test est bien liée avec le test réel.
没有评论:
发表评论