Pass4Test est un site d'offrir l'outil de formation convenable pour les candidats de test Certification IT. Le produit de Pass4Test peut aider les candidats à économiser les temps et les efforts. L'outil de formation est bien proche que test réel. Vous allez réussir le test 100% avec l'aide de test simulation de Pass4Test. C'est une bonne affaire à prendre le Certificat IT en coûtant un peu d'argent. N'hésitez plus d'ajouter l'outil de formation au panier.
Le test HP HP0-Y33 peut bien examnier les connaissances et techniques professionnelles. Pass4Test est votre raccourci amené au succès de test HP HP0-Y33. Chez Pass4Test, vous n'avez pas besoin de dépenser trop de temps et d'argent juste pour préparer le test HP HP0-Y33. Travaillez avec l'outil formation de Pass4Test visé au test, il ne vous demande que 20 heures à préparer.
Pass4Test est un site web qui vous donne plus de chances à passer le test de Certification HP HP0-Y33. Le résultat de recherche sortis par les experts de Pass4Test peut assurer que ce sera vous ensuite qui réussirez le test HP HP0-Y33. Choisissez Pass4Test, choisissez le succès. L'outil de se former de Pass4Test est bien efficace. Parmi les gens qui ont déjà passé le test, la majorité a préparé le test avec la Q&A de Pass4Test.
Quand vous hésitez même à choisir Pass4Test, le démo gratuit dans le site Pass4Test est disponible pour vous à essayer avant d'acheter. Nos démos vous feront confiant à choisir Pass4Test. Pass4Test est votre meilleur choix à passer l'examen de Certification HP HP0-Y33, et aussi une meilleure assurance du succès du test HP0-Y33. Vous choisissez Pass4Test, vous choisissez le succès.
Maintenant, beaucoup de professionnels IT prennent un même point de vue que le test HP HP0-Y33 est le tremplin à surmonter la pointe de l'Industrie IT. Beaucoup de professionnels IT mettent les yeux au test Certification HP HP0-Y33.
C'est pas facile à passer le test Certification HP HP0-Y33, choisir une bonne formation est le premier bas de réussir, donc choisir une bonne resource des informations de test HP HP0-Y33 est l'assurance du succès. Pass4Test est une assurance comme ça. Une fois que vous choisissez le test HP HP0-Y33, vous allez passer le test HP HP0-Y33 avec succès, de plus, un an de service en ligne après vendre est gratuit pour vous.
Code d'Examen: HP0-Y33
Nom d'Examen: HP (Implementing HP Wireless Networks)
Questions et réponses: 97 Q&As
HP0-Y33 Démo gratuit à télécharger: http://www.pass4test.fr/HP0-Y33.html
NO.1 In the configuration of an E-MSM760 controller, you find that the default VSC is access controlled.
Which statements are true about an inbound packet on the LAN port which does not have a VLAN tag?
(Select two.)
A. The packet is dropped if the destination IP address is not the same as the MSM controllerIP address on
the LAN port.
B. The packet is associated with that VSC if the packet has a known SSID tag.
C. The packet is dropped as the LAN port will only accept VLAN tagged packets.
D. The packet is associated with the default VSC if it has no matching SSID tag.
E. The packet is dropped if the destination IP address is not the same as the MSM controllerIP address on
the LAN port.
Answer: B,D
HP examen HP0-Y33 certification HP0-Y33
NO.2 On a VSC, which Traffic Type options can be specified for egress VLANs? (Select three.)
A. default gateway traffic
B. IP filtered traffic
C. authenticated traffic
D. untagged traffic
E. intercepted traffic
F. unauthenticated traffic
Answer: C,E,F
HP certification HP0-Y33 certification HP0-Y33 certification HP0-Y33
NO.3 After completing the configuration and synchronization of all team members, you discover through your
initial testing that your APs cannot associate with your team controllers. To solve this problem what should
you check?
A. that your VSC DHCP parameters are set correctly
B. that you have enabled your local DHCP server on your Team Manager (controller)
C. that an external DHCP server exists and is operational on your network
D. that DHCP Relay has been configured on all your team members (controllers)
Answer: C
certification HP HP0-Y33 examen certification HP0-Y33 HP0-Y33 HP0-Y33
NO.4 When configuring the MSM controller for a controlled mode network, at which point is the AP's VSC
egress VLAN configured?
A. when the Group is created
B. when the AP is synchronized with its Group
C. when the specified VLAN is created
D. when the VSC is bound to the Group
Answer: D
HP HP0-Y33 HP0-Y33 examen certification HP0-Y33 HP0-Y33
NO.5 When would the IP address of the Internet port on an MSM controller be set to "No Address"?
A. when NAT is enabled
B. when only authenticated traffic is passing through the Internet port
C. when NAT is disabled
D. when only VLAN traffic is passing through the Internet port
Answer: D
HP examen certification HP0-Y33 certification HP0-Y33 HP0-Y33 examen HP0-Y33 examen
NO.6 In order to create a new VLAN in an MSM controller configuration, which path should you take to
access the correct screen?
A. VSCs>[select a VSC]>VSC Profile
B. VSCs>VSC bindings>VLANs
C. Controller>Management>VLANs
D. Controller>Network>Ports
Answer: D
HP examen certification HP0-Y33 HP0-Y33 HP0-Y33 HP0-Y33
NO.7 Click the Exhibit button.
You have deployed a guest wireless service in the reception area of a marketing firm. The clients
associated with the guest service should be assigned to VLAN 10. When you test the configuration,
clients are being assigned IP addresses in the 192.168.0.0 subnet. You view the access controller
configuration shown in the exhibit.
Which command resolves the issue by correctly associating VLAN 10 with the appropriate interface.?
A. [sysname-wlan-st-1] port access vlan 10
B. [sysname-WLAN-ESS1] port access vlan 10
C. [sysname-GigabitEthernet1/0/1] port access vlan 10
D. [sysname-Vlan-interface10] port access vlan 10
Answer: B
HP HP0-Y33 HP0-Y33 examen certification HP0-Y33
NO.8 An HP E-MSM760 Controller receives untagged traffic on its LAN port from a wireless client associated
with an access point from another manufacturer. In a WLAN configured with VSCs 1-4, which VSC will be
selected to pass this traffic?
A. VSC 2
B. VSC 3
C. VSC 4
D. default VSC
Answer: D
certification HP HP0-Y33 HP0-Y33
NO.9 A financial institution needs to deploy 80 access points in their new building. Since the institution is not
interested in purchasing additional wired switches for their LAN infrastructure, which solution should be
recommended to manage the access points?
A. HP A3000-24G-PoE+ Wireless Switch
B. HP A-WX5002 Access Controller
C. HP A-WX5004 Access Controller
D. HP A7500/E7900 Access Controller Module
Answer: C
HP examen certification HP0-Y33 HP0-Y33 HP0-Y33 certification HP0-Y33
NO.10 In your existing wireless network you have a variety of E-MSM controllers. Which products are capable
of supporting teaming? (Select two.)
A. E-MSM710
B. E-MSM730
C. E-MSM750
D. E-MSM760
E. E-MSM765zl
Answer: D,E
HP HP0-Y33 HP0-Y33 HP0-Y33 examen HP0-Y33 examen certification HP0-Y33
NO.11 .What are the major benefits of creating a team of controllers? (Select two.)
A. controller redundancy
B. Flow support
C. local DHCP support
D. PPTP client and server support
E. single IP management of all team controllers
Answer: A,E
HP examen HP0-Y33 examen HP0-Y33 examen HP0-Y33 HP0-Y33 examen HP0-Y33
NO.12 which feature should you enable to enhance Layer 2 (L2) roaming?
A. seamless roaming
B. rapid authentication
C. WPA2 Opportunistic Key Caching
D. single network AP hopping
Answer: C
HP HP0-Y33 examen HP0-Y33 examen HP0-Y33 HP0-Y33 certification HP0-Y33
NO.13 Your controller's Team Manager has suffered a catastrophic failure and an Interim Manager has been
selected. Which action is required to allow the Interim Manager to distribute a new software release to its
team members?
A. The Interim Manager is promoted to Team Manager status.
B. The Interim Manager is rebooted and reconfigured as the new Team Manager.
C. The Interim Manager promotes another team member to Team Manager and the new TeamManager
uploads the new software to the team members.
D. Each Team Member is manually upgraded from the Interim Manager.
Answer: A
HP examen certification HP0-Y33 HP0-Y33 HP0-Y33 examen certification HP0-Y33
NO.14 What is the maximum number of E-MSM controllers that can be configured into a single team?
A. 1
B. 2
C. 3
D. 4
E. 5
Answer: E
HP examen HP0-Y33 HP0-Y33
NO.15 When Centralized Access Control is configured as Automatic, when is a user data tunnel created?
A. when more than one controller is on the network that has the same access control configuration
B. when tunnels are manually configured and available
C. when IPSec is set up between two controllers
D. when a synchronized AP and its controller are on different subnets
Answer: D
HP examen HP0-Y33 HP0-Y33 examen HP0-Y33 HP0-Y33
Selon les feedbacks les professionnels bien réputés dans l'Industrie IT, Pass4Test est un bon catalyseur de leurs succès. L'outil de formation offert par Pass4Test leur aide d'économiser le temps et l'argent, le plus important est qu'ils aient passé le test HP HP0-Y33 avec succès. Pass4Test est un fournissur fiable. Vous allez réaliser votre rêve avec l'aide de Pass4Test.
没有评论:
发表评论