2013年8月14日星期三

Le meilleur matériel de formation examen SCO 090-091

C'est un bon choix si vous prendre l'outil de formation de Pass4Test. Vous pouvez télécharger tout d'abord le démo gratuit pour prendre un essai. Vous aurez plus confiances sur Pass4Test après l'essai de notre démo. Si malheureusement, vous ne passe pas le test, votre argent sera tout rendu.


Pass4Test est un fournisseur de formation pour une courte terme, et Pass4Test peut vous assurer le succès de test SCO 090-091. Si malheureusement, vous échouez le test, votre argent sera tout rendu. Vous pouvez télécharger le démo gratuit avant de choisir Pass4Test. Au moment là, vous serez confiant sur Pass4Test.


Le test SCO 090-091 est une examination de techniques professionnelles dans l'Industrie IT. Pass4Test est un site qui peut vous aider à réussir le test SCO 090-091 rapidement. Si vous utiliser l'outil de formation avant le test, vous apprendrez tous essences de test Certification SCO 090-091.


Pass4Test est un fournisseur professionnel des documentations à propos du test Certification IT, avec lequel vous pouvez améliorer le future de votre carrière. Vous trouverez que nos Q&As seraient persuadantes d'après d'avoir essayer nos démos gratuits. Le démo de SCO 090-091 (même que les autres démos) est gratuit à télécharger. Vous n'aurez pas aucune hésitation après travailler avec notre démo.


Le test simulation offert par Pass4Test est bien proche du test réel. Vous pouvez apprendre tous essences d'un test réel à courte terme avec l'aide de Pass4Test. Pass4Test peut vous assurer le succès 100% de test SCO 090-091.


Code d'Examen: 090-091

Nom d'Examen: SCO (UNIXWARE 7 NONSTOP CLUSTERS CERTIFICATION EXAM V1.0)

Questions et réponses: 66 Q&As

Participer au test SCO 090-091 est un bon choix, parce que dans l'Industire IT, beaucoup de gens tirent un point de vue que le Certificat SCO 090-091 symbole bien la professionnalité d'un travailleur dans cette industrie.


090-091 Démo gratuit à télécharger: http://www.pass4test.fr/090-091.html


NO.1 Which statement best defines a fault zone?
. An area where single points of failure cannot be avoided. Thus, if a failure occurs in a fault
zone, the cluster becomes unavailable.
B. A place in a program that was not explicitly recompiled for the UnixWare 7 NonStop Clusters
(NSC) environment, where the program terminates
due to incompatibility with NSC.
C. An area of hardware or software where a redundancy exists and a single failure can occur
without bringing down the entire cluster.
D. The area of cluster operating systems most likely to crash the cluster.
Answer: C

SCO   090-091   090-091

NO.2 The Split-Brain Avoidance (SBA) cable is:
A. A standard RS-232 null-modem cable only requiring signals Transmit, Receive, and signal-
Ground
B. A standard RS-232 null-modem cable requiring all 25-pins to be connected
C. A standard RS-232 null-modem cable requiring the minimum 9 pins found in a DB-9 connector
D. A special cable that can only be purchased from a UnixWare 7 NonStop Clusters OEM
Answer: A

SCO examen   090-091   090-091
6. The name for the file that contains the list of load leveling parameters is:
A. /etc/cluster/load_level_parameters
B. /etc/load_level/parameters
C. /etc/cluster/load_level/parameters
D. /etc/cluster/load_level/parms
Answer: C

SCO   090-091   090-091   090-091
7. You should choose CNM as your protected storage method when:
A. You want the fastest possible disk I/O performance
B. You want the lowest-possible window of vulnerability when a node fails
C. You are willing and able to accept the slower write performance and greater window of
vulnerability to reduce the price of the cluster
D. You dont care about the price of the cluster
Answer: C

SCO   090-091   090-091 examen   090-091   090-091 examen
8. Which statement best describes the condition known as split brain and the measures required
to
prevent it from occurring?
A. Split brain occurs when two nodes perform the same task in parallel and come up with a
different result. The way to avoid split brain condition is to add a third node to the cluster,
performing the same task, serving as a tie-breaker. That is, whichever solution gets two votes,
wins.
B. Split brain occurs when two nodes each try to serve the same CVIP from their own LAN cards.
The way to prevent a split brain condition is to place a split brain avoidance node on the LAN
which will tell a node when it should serve the CVIP .
C. Split brain occurs when two nodes each think they should be the root node at the same time. In
the case of CNM, this causes filesystem corruption. In the case of external storage, this can cause
ping-pong panics. The way to prevent a split brain condition is to install a serial cable between the
two potential root nodes and configure split brain avoidance during the UnixWare 7 NonStop
Clusters installation procedure. Alternately, you can use a SAN configuration that can detect the
different between a node with a bad SAN connection and a node that is not functioning at all.
D. Split brain is when two processes are migrated by the load-balancing daemon and the
processes start to ping-pong between nodes because of incorrectly configured load-balancing
metrics. The way to prevent a split brain condition is to configure load balancing metrics properly.
Answer: C

SCO examen   090-091   090-091
9. Which statement best describes what SSI means to an administrator of UnixWare 7 NonStop
Clusters?
A. Each node in the cluster is administered separately
B. The entire cluster is administered as a single computing resource, except where an operation
must be node-specific, such as shutting down a single node
C. The entire cluster is administered as a single computing resource, without exception
D. SSI is not implemented by UnixWare 7 NonStop Clusters
Answer: B

certification SCO   certification 090-091   090-091   certification 090-091
10. In clustering, a protected resource is one that:
A. Has special circuits that keep if from being damaged during a voltage surge
B. Is monitored by special hardware such that if it should fail, support engineers will be notified
immediately that it needs to be replaced
C. Is monitored by special software to insure that it is not over-used
D. Is redundant in a cluster to avoid a single point of failure (SPF) and is automatically pressed
into service by the cluster in the event the primary component fails
Answer: D

SCO examen   090-091 examen   090-091 examen

NO.3 The startup, shutdown, restart, and other scripts used by the failover daemon must be:
A. Kept in the /etc/keepalive.d directory, with user and group ownership of adm and permissions of
755
B. Kept in the /etc/spawndaemon.d directory, with user and group ownership of adm and
permissions of 755
C. Kept in the /etc/spawndaemon.d directory, with user and group ownership of adm and
permissions of 644
D. Kept in the /etc/keepalive.d directory, with user and group ownership of adm and permissions of
644
Answer: A

SCO   090-091 examen   090-091 examen   090-091   090-091

NO.4 The PID of a process started using the onnode command:
A. Reflects the cluster-node number on which the onnode command is run
B. Reflects the cluster-node number of the node on which onnode starts the new command
C. Will always be between 2 and 65535
D. Will have no special value or meaning
Answer: A

SCO   090-091   090-091   090-091

NO.5 If a U appears in the 2 nd (run state) field of the /etc/inittab file, it means that:
A. This entry is run when the cluster is being brought up to the specified run state
B. This entry is run on a node when that node joins the cluster at the specified run state
C. This entry is run by the root node when it comes up to the specified run state
D. The entry is not run until the U, or load-factor, on the node is less than the value specified in the
last field.
Answer: B

SCO examen   090-091   090-091 examen   certification 090-091

La solution offerte par Pass4Test comprenant un test simulation bien proche de test réel SCO 090-091 peut vous assurer à réussir 100% le test SCO 090-091. D'ailleur, le service de la mise à jour gratuite est aussi pour vous. Maintenant, vous pouvez télécharger le démo gratuit pour prendre un essai.


没有评论:

发表评论