SNIA S10-300 examen pratique questions et réponses

Pass4Test est un site particulier à offrir les guides de formation à propos de test certificat IT. La version plus nouvelle de Q&A SNIA S10-300 peut répondre sûrement une grande demande des candidats. Comme tout le monde le connait, le certificat SNIA S10-300 est un point important pendant l'interview dans les grandes entreprises IT. Ça peut expliquer un pourquoi ce test est si populaire. En même temps, Pass4Test est connu par tout le monde. Choisir le Pass4Test, choisir le succès. Votre argent sera tout rendu si malheureusement vous ne passe pas le test SNIA S10-300.

Aujourd'hui, c'est une société pleine de gens talentueux, la meilleure façon de suivre et assurer la place dans votre carrière est de s'améliorer sans arrêt. Si vous n'augmentez pas dans votre carrière, vous êtes juste sous-développé parce que les autres sont meilleurs que vous. Pour éviter ce cas, vous devez vous former successivement.

Le test SNIA S10-300 est une examination de techniques professionnelles dans l'Industrie IT. Pass4Test est un site qui peut vous aider à réussir le test SNIA S10-300 rapidement. Si vous utiliser l'outil de formation avant le test, vous apprendrez tous essences de test Certification SNIA S10-300.

Code d'Examen: S10-300

Nom d'Examen: SNIA (Snia Storage Architect-Assessment,Planning and Design)

Questions et réponses: 85 Q&As

Le test Certification SNIA S10-300 est une chance précieuse à augmenter vos connaissances de technologie informatique dans l'industrie IT. Il attire beaucoup de professionls à participer ce test. Pass4Test peut vous offrir les outils de formation particuliers à propos de test SNIA S10-300. Vous réaliserez plus tôt votre rêve avec la Q&A écrite par l'équipe professionnelle de Pass4Test. Pass4Test se contribue à vous donner un coup de main pour réussir le test SNIA S10-300.

S10-300 Démo gratuit à télécharger: http://www.pass4test.fr/S10-300.html

NO.1 Your SAN currently has eight server ports and eight disk ports on one 16 port switch. Each server port
requires 80 MB/s of one-way bandwidth, spread out evenly among the storage devices. The customer
would like to add 28 server ports along with 28 disk ports. Each server will evenly distribute its traffic on
each disk. Using 16 port 1 Gb switches, which topology should you select to minimize the number of
switches and ISLs required?
A. star
B. full mesh
C. core-edge
D. point-to-point
Answer: C

certification SNIA   S10-300   S10-300   S10-300

NO.2 What is the primary objective of the storage capacity planning process?
A. To demonstrate the effects of changes in storage service levels.
B. To reach agreement with application representatives and management over the storage requirements.
C. To produce a capacity plan at agreed intervals which fits into the business planning cycle, e.g. the
financial year.
D. To calculate the effects on ILM service levels, array and fabric utilization of the estimated demand over
the period of the planning horizon.
Answer: C

certification SNIA   S10-300 examen   S10-300 examen   S10-300 examen

NO.3 You have been tasked with identifying upgrade options for your networked storage. Which two should
you do? (Choose two.)
A. Only select hardware and software that is SMI-S compliant.
B. Share all received information openly with all vendors involved.
C. Understand needs and requirements as well capabilities of your existing technology.
D. Enlist legal advice or support of your purchasing department when creating RFI, RFP, and RFQs.
Answer: CD

SNIA   S10-300 examen   certification S10-300   S10-300   S10-300 examen

NO.4 A customer is using host based virtualization to mirror critical data between two vendors disk arrays.
Which two scenarios are true? (Choose two)
A. The host can use the same HBA to connect to both arrays
B. The customer can adhere to either vendors SAN design rules
C. The customer must adhere to both vendors SAN design rules
D. The host must use different HBAs with different firmware to connect to each array
Answer: CD

SNIA   certification S10-300   certification S10-300   S10-300 examen

NO.5 A customer has a terabyte database and is required to back up the data daily. The SLA has allotted 6
hours for completion of the backup from 7:00 P.M. until 1:00 A.M. However, the customer has a tape
library with only five SDLT tape devices running at native speeds of 40 GB/hour. Which two should you do
to successfully meet the expected SLA requirements? (Choose two.)
A. interleave data streams
B. enable server-based compression
C. use multiple data streams across multiple devices
D. prioritize the schedule to launch during periods of greatest inactivity
Answer: AC

SNIA   S10-300   S10-300 examen   certification S10-300

NO.6 When planning a NAS solution, which two sub-processes are associated with NAS Service Capacity
Management? (Choose two.)
A. Define future requirements.
B. Manage peak demand for NAS services.
C. Establish IOPS monitoring and exception thresholds.
D. Run reports on the storage and network utilization and IOPS of components.
Answer: BC

SNIA   S10-300   S10-300

NO.7 What is the goal of a SAN designed with no single point of failure?
A. to provide redundant paths to data
B. to have a good data backup system
C. to minimize unexpected loss of data access
D. to have clustered servers so that one is always available
Answer: C

certification SNIA   certification S10-300   S10-300   S10-300

NO.8 A customer has a disk subsystem with eight ports. Each port delivers 200 MB/s. The customer wants a
solution designed which allows access from 32 servers with no single point of failure. Which number of
HBAs and the associated throughput, provide server access to the disk subsystem?
A. 16 HBAs, 75 MB/s
B. 32 HBAs, 90 MB/s
C. 64 HBAs, 25 MB/s
D. 64 HBAs, 50 MB/s
Answer: C

SNIA   S10-300   S10-300   S10-300 examen

NO.9 What are three key advantages of deploying a director-based solution over a mesh of switches?
(Choose three.)
A. lower cost
B. consistent latency
C. improved availability
D. increased hop count
E. ease of management
Answer: BCE

SNIA   certification S10-300   S10-300   S10-300

NO.10 When implementing a high performance NAS solution you must check for which two items? (Choose
two.)
A. Ensure the network is full duplex.
B. Ensure that hosts have 100Mb NICs.
C. Ensure the network is at least 100Mb.
D. Ensure routers are configured for OSPF.
Answer: AC

SNIA   S10-300   S10-300

Est-ce que vous vous souciez encore pour passer le test SNIA S10-300? Pourquoi pas choisir la formation en Internet dans une société de l'informatique. Un bon choix de l'outil formation peut résoudre le problème de prendre grande quantité de connaissances demandées par le test SNIA S10-300, et vous permet de préparer mieux avant le test. Les experts de Pass4Test travaillent avec tous efforts à produire une bonne Q&A ciblée au test SNIA S10-300. La Q&A est un bon choix pour vous. Vous pouvez télécharger le démo grantuit tout d'abord en Internet.